Oh wotsits!I\'ve had an accident!

Started by nikp, December 31, 2003, 01:42:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nikp

Hi chaps. Tis me again!

I thought I\'d take my girlfriends brother out for a spin in the RX7 today, as we were visiting her parents in Essex for new years.

It was wet, and even though I wasn\'t going at all fast I obviously put my foot down too early going round a corner! Result: Fish tailing rear end with us as more or less passengers. We ended up hitting an embarkment of earth. This broker the underside of the front bumber (Fortunately the actual bumber is fine) broke one of the fitting points of the front left fog light, but worst of all it appears to have pierced the radiator. Oh poo! Ok, ok, I deserve all I get, etc, etc. I have learned my lesson!

But the basic question is, how much is a new radiator gonna end up costing me? Or, alternatively, what are the chances of anyone knowing a place that does second hand ones in the essex area? Does anyone have a spare one? I\'m a member of the AA, so I can get home to bristol with the car if need be!

Any help out there would be appreciated! (And I know I\'m a dork for letting that happen - I\'m gutted!! :( )

tom

go on the for sale section! i\'m sure that someone recently had  one up for sale!

DRAGON

I have used ones in stock. Also check anti-roll bar mounts, they bend real easy.

nikp

DRAGON, you have PM.

Alternatively, how much are you looking for for a radiator?

Cheers!

Gman

Sorry to hear bout your accident - glad the damage isnt to bad - Just had a moment myself; Overtaking a couple of cars I had to nip back in due to traffic jerked the steering wheel too much straightening up and l just managed to lift off before the backend went - at 80 this would have done me no good at all.

DaveCollins

Nik,

I\'m sorry for you.  Hope you manage to arrange to get back OK.

See you next week.

Dave

nikp

Cheers Dave.

I\'m sure it\'ll be alright, damage doesn\'t appear too bad. It\'s just the inconvenience of the broken radiator really!

Andyp

Unlucky mate :(

Just as a suggestion, have you thought about getting an aftermarket one at all? Nice fluidline *dribble* one here  for $435 + shipping... I know what I\'d do ;)
The Beatles were prats.."Money can\'t buy me lovveeee".. utter rubbish. You can buy love here

Buy my car foo! :D

20B_boy

Any one got a Fluidyne or Koyo rad?

I\'ve heard a few things about them, none particularly great?

Cheap though!
R.

Andyp

seem to rate them on the US forums from what I\'ve read, the Koyos and Fluidline are more or less the same thing though...best thing about the fluidline is they do slot right in on the standard mounts which is handy... though the Koyo\'s have larger cores but are a bit of a bugger to fit
The Beatles were prats.."Money can\'t buy me lovveeee".. utter rubbish. You can buy love here

Buy my car foo! :D

nikp

Well, an update on the situation: I tried some rad weld on the radiator, and the result wasn\'t quite what I had hoped for! No improvement on the leak(s)! It\'s better described as a sieve now, than a radiator!

Fortunately, I made a phone call to the AA and they\'ll take us back to Bristol on a flat bed truck. From there I can organise the repair operation! I\'m only looking for a direct replacement at the time being. Just wanna get it back together and working like it was for as little cost as possible.

This event has brought forward my intended purchase of a veilside front bumper to as soon as possible (Although the bumber is more or less of, it has suffered slightly, but will be aceptable until I get the replacement sorted!)

20B_boy

Hmm, also read that some yanks dont like em at all.

Might try getting one made up here like Steve did and see how it goes, he had good results. Or may be some thing by Griffin? Any one else specific worth considering for a mod\'d cFDs rad? I know Serck are big here but I know a couple of people who\'ve been f#cked about by them too...
R.

nikp

Well, here\'s an update on the radiator side of things: My girlfriends dad has removed the radiator for me, and says it looks fine! The rad that\'s been bent is the engine oil radiator. There\'s was no oil being leaked after the accident, but there was difinately water leaking from it! I don\'t understand what has broken! Water was dripping out at quite a rate! The radiator is going to get pressure tested (Hopefully today), and depending upon whether it is ok or not, I shall be very confused!

If there\'s no problems with the radiator, what on earth could be leaking water from the front area of the car!?

clive

Hi Nik,

Is the water leak coming from the O/S [ drivers side ]
of the car if so it could be the water overflow tank leaking failing that was it the washer bottle maybe from thje N/S,  both tanks are behind the Oil Rads hideing behind the plastic inner mud guards

Hope this helps.
All the best Clive

Nath

Nick i brought a new radiator direct from mazda back in december and cost me £360