ATS 2 way LSD questions...

Started by markrx7, February 13, 2007, 10:47:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

markrx7

right guys....

just fitted a second hand 2 way LSD to my fd, went on perfect and with brand new diff oil all supplied from Dragon, drove it out of the workshop.... not much difference, slight jolts when going round slow corners etc, not a problem, but more or less the same drive as the standard one other than the stupidly good grip on the straights in the wet :D

well 3 miles later and near on close to home, it starts knocking & banging (like quite a few people have said about their lsd\'s) well why would it start doing it then rather than straight away? its really vigerous when turning around and pulling out of junctions and going round slow corners, it also grinds as well instead of just knocking. is this normal? if it is then ill deal with it, but i dont want to be causing damage :eek:

any suggestions etc??

antnicuk

if its been stood for a while it may have freed all the plates and its started working normally.  

Can i say it please....................... please............ go on let me say it........
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


markrx7

lol, well if its normal then thats ok! i just wanna make sure that its gone on ok and it aint damaging it. let the roundabout action begin :D whens the next air field day ?? lol

antnicuk

they do some getting used to,   i think mines coming out though so its for sale if anyone wants it.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


markrx7

lol yes i can imagine, go on, i know you want to say it :P

Spartacus

Are they adjustable for slip at all?

shaunwil

Are the 2 way ones much noiser than the 1.5way ones ???

Investigating for next mod (and macky t\'s)

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

antnicuk

mine is no not noisy at all, there is no difference to the stock diff, just clonking i dont like
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!