Any Idea Where This Fits ????

[Prof]

the only difference is the earlier one has a remote resovoir which is actually a bit easier to fit but other than that no difference.
 
I\'m not entirely sure but there is some kind pressure regulator on the stock PAS pump, iirc there is only 1 or 2 wires going to it, there is also a second smaller high pressure line on the rack which you block off if you fit the saxo pump. This may be something to do with the speed sensitive bit or it might just be an electronically controlled pressure reg, it would be fairly easy to check by putting a pressure gauge on it and adjusting the voltage going to reg, if you fancied playing around with it.

I\'m thinking this might be the power steering pressure switch - it feeds back to the ECU and eventually controls the Air Supply Valve to feed more air in when the car is on low revs or idle to prevent stalling.

[Prof]

mine is always scary - its like a boat in the dry , the wet is just madness and based on that i only drive it once a month - i never get used to it
 
im hoping the coil overs will sort some of the steering out ( more things to fit !! )

Stu - decent tyres mate - that\'s what you need !:D :eek

[grinder]

got me some Avon ZZ1\'s ( or 3\'s ) on the spare set of wheels i have , just not had chance to change them

the plan is

1 - take the wheels off the cab
2 - take the wheels off the coupe
3 - put the cab wheels on the coupe
4 - put the 15\'s ebay wheels onto the cab
5 - put the coupe wheels in the garage with the spare set of split rims i have in there

can never have too many wheels can you

Stu

[travellinbob]

What about the electric power steering unit from a corsa? dont they get rid of the hydraulics al together?
 also Stu next time you get the intercooler down from the atic to look at could you tell me how thick it is? Just wondering if an evo  intercooler would fit in the front of the moggy?
 cheers, oh and ..........get all those good things onto one of your cars or sell it all really cheaply to me!
 cheers, michael.

[grinder]

its about 2.5 - 3 inch think

if you want exact measurements then i can get them for you

sell them cheap - hummmmmm could have done you a swap for a nice ECU

eventually i will fit what i have - just not sure if that will be this year or next !! LOL

[travellinbob]

cheers for that! Just think about how much fun you have with your car now and how much more fun you could have if you did get these things on!!!

[grinder]

yeah i know what you mean

its just getting around to fitting stuff - i dont have the space to be honest

[travellinbob]

Find amate with a garage or carport. Get some other mates together, get some beer together and have a working bee!!!!!!

[Ricco_04]

Dont know if it\'s any help to you but this is a simple look at the steering thingymebob (im interested in the mod too :chat  )

[grinder]

you seem to be missing an engine there matey !

[Prof]

you seem to be missing an engine there matey !

At least his is oh so clean, not like ours

[Ricco_04]

lol :chat

I tell you - it\'s coming to something, you leave a car in one spot for 5mins and someone nabs the engine! :2eek  :Giggle

[grinder]

LOL:D

it is nice and clean though

bet you cant keep it like that !

[Ricco_04]

Thats a bet I am deffinately NOT going to take! :Giggle

[grinder]

if you keep ontop of it - i bet its not tooo bad to keep clean to be honest

mine has 17 yrs of grime to get off