lost mi rebuild pics

Bowsy · February 04, 2007, 07:47:23 PM

Can anyone tell me what connects to this pipe,My mind has gone completly dead :Hammer and i have lost a load of my pics showing wer everything went

Bowsy · February 04, 2007, 08:03:08 PM

its a single turbo that i\'m running so looking at the vac diagram it goes to the breather.

Is this correct ?

Grizzly · February 04, 2007, 08:06:10 PM

Yep, Thats a Breather on the Twin Turbo set up.

Every Single Turbo i\'ve come across have had that Blocked off.

Bowsy · February 04, 2007, 08:09:27 PM

thats what got me as i don\'t remember owt being on it

Grizzly · February 04, 2007, 08:11:29 PM

Its proberly blown the cap off (if it had one on)

Bowsy · February 04, 2007, 08:13:12 PM

also is this how people have connected there omp vac lines as this is how mine was and i\'m sure i\'ve seen other peoples setup different
http://img.photobucket.com/albums/v14/Ste_Type-R/singlevachose1.jpg

Grizzly · February 04, 2007, 08:21:25 PM

From memory there not Vac pipes (there breathers) (they go to the two slightly bigger metal pipes on the Rats nest).

efiniste · February 04, 2007, 08:22:06 PM

That\'s wrong. It needs to go to a vacuum source (ie pre turbo) rather than a boost source as it is on that pic.

Steve

Grizzly · February 04, 2007, 08:24:11 PM

http://i32.photobucket.com/albums/d26/Grizzly30/PICT0005.jpg This pic is still the Twin set up with the Extra Solanoids but you get the Picture where the Breather hoses go.

BTW you\'re not too far off the Big Dia pipe with the One way valve in it (on the bottom of the Upper intake) is where the breather system usaly starts off from on the Twins

Bowsy · February 04, 2007, 08:28:54 PM

these are wer they was connected
to a t-piece
http://img.photobucket.com/albums/v14/Ste_Type-R/2.jpg

then the other end went ther
http://img.photobucket.com/albums/v14/Ste_Type-R/1.jpg

Bowsy · February 04, 2007, 08:30:20 PM

i know where ya mean chris but singles don\'t always have that metal pipe

so has it been in the wrong place ?

Grizzly · February 04, 2007, 08:31:30 PM

OK, did it have any one way valve in? i\'ve not seen them hooked up like that before? maybe its just a diffrent way of doing the same job.

Grizzly · February 04, 2007, 08:32:53 PM

Quote from: *Bowsy*i know where ya mean chris but singles don\'t always have that metal pipe

so has it been in the wrong place ?

Hasn\'t yours? I know there are loads of ways of making an FD a Single Turbo but i\'ve not seen one with NO rats nest.

Don\'t know about wrong place?? but i would have thought it would have some sort of one way valve in it?

Bowsy · February 04, 2007, 08:34:26 PM

nope didn\'t have anything on it just the pipe like it shows

an other pic of it,definatly went there,Is there a different place to put it
http://img.photobucket.com/albums/v14/Ste_Type-R/P1010083.jpg

Grizzly · February 04, 2007, 08:39:58 PM

Just looking at the Diagram of the Vac set up and that is Defo just a breather, i don\'t think they should be piped up that way.