1982 rx7 project. parts car for sale

[shaunwil]

What condition are seats in ?? Could you email me some photos of them to shaun.wilmer(AT)btinternet.com. Are all the door locks in good condition ??

Shaun

[dooby69]

iv only had a quick look over the interior spent more time under the hood the passanger seat is in good condition the drivers has had more use there is a split in the fabric at the side closest to the door and a small hole in the base of the seat both repairable other than that in good condition there is no fading to the red part of the seat like there is in my uncles through use the locks appear to be fine i had to pop the boot lock when i collected the car as the doors was frozen shut and we couldnt get into the car but i dont think i damaged the lock i have 2 keys for the full lock set one original mazda key and one copied key both keys opperate all locks i know how annoying it is to have 3 keys to one car and was happy to see this car has lived with one set of locks the locks work fine the drivers side one has faded paint wise but has no rust on it would look good with a coat of black paint before being fitted, ill try and get some pictures posted soon of most parts of the car for sale

[shaunwil]

Cool, could you email me some images of the locks to shaun.wilmer AT btinternet.com. Rays got some good condition seats with my name on now

Shaun

[mr bricolage]

Hello there

I may be interested in the nearside front wing if it\'s in good condition. Also does the vehicle have a twr bodykit (not asking too much :rolleyes:) I need the front bumper.

[dooby69]

the wing is in one piece but rust has started could make a good wing but would need a bit of work your welcome to have a look i still have the front bumper i havent touched the bumper dont know its condition but i think it is fine im going down today to take the ignition barrel off so will have a look for you

[dooby69]

the passanger wing is repaintable the drivers side would need some filling are any other parts required by one off this car i will be getting the engine out this next weekn and will be crushing the car so please let me know if any parts are wanted

[DanneH]

the passanger wing is repaintable the drivers side would need some filling are any other parts required by one off this car i will be getting the engine out this next weekn and will be crushing the car so please let me know if any parts are wanted

Hi, Do you have any of these parts:
I don\'t really know all the right words for everything so I\'ll post some pictures to help describe.

The light in the bumper on the left side of the car (passenger side in a UK car) (my pic is on the opposite side)
The tray on the first picture
The cover for the light on pic2
The rings around the headlights if they are not rusty.
The little plastiv thing you see on the fouth pic on the left side back by the rear glas window.
Lid for the gasoiline tank.
The lower tray in the mid console

[mpk490p]

Hi, Do you have any of these parts:
I don\'t really know all the right words for everything so I\'ll post some pictures to help describe.

The light in the bumper on the left side of the car (passenger side in a UK car) (my pic is on the opposite side)
The tray on the first picture
The cover for the light on pic2
The rings around the headlights if they are not rusty.
The little plastiv thing you see on the fouth pic on the left side back by the rear glas window.
Lid for the gasoiline tank.
The lower tray in the mid console

i have all of these apart from the small plastic triagle on the rear windows and the interor light cover (all mine are broken!)
you wont get a plate for the whole above the ashtray as thats for the radio, someone has made it larger by the looks of it, it is the whole thing, the lower one is a small tray

i will grab some pictures and get them up for you
Mark

i have 4 or 5 of the light rings, they are all a little rusty but will be fine with a quick rub down,
do you nned the switchs in the 2nd picture? again i have plenty, the front two are electric windows back 2, 1 black and 1 for the rear wiper
the lock came from a s2
i have the whole light unit if you need the whole thing

Mark

[shaunwil]

What condition are the suspension bits at the back of the car. Are the control Arms straight that hold the rear axle in place. Picture attached

I\'m not bothered what condition the bushes are in, as long as they aren\'t bent !

Shaun

[shaunwil]

Since your close too how much would you want for the complete rear axle assembly

Shaun

[mpk490p]

Hi, Do you have any of these parts:
I don\'t really know all the right words for everything so I\'ll post some pictures to help describe.

The light in the bumper on the left side of the car (passenger side in a UK car) (my pic is on the opposite side)
The tray on the first picture
The cover for the light on pic2
The rings around the headlights if they are not rusty.
The little plastiv thing you see on the fouth pic on the left side back by the rear glas window.
Lid for the gasoiline tank.
The lower tray in the mid console

pictures as requested

the wing has one small dent in it (second picture)
there is no rust in the usuall places infact it is a very good wing (just dirty)

Mark

[daverey]

Hi, Do you have any of these parts:
I don\'t really know all the right words for everything so I\'ll post some pictures to help describe.

The light in the bumper on the left side of the car (passenger side in a UK car) (my pic is on the opposite side)
The tray on the first picture
The cover for the light on pic2
The rings around the headlights if they are not rusty.
The little plastiv thing you see on the fouth pic on the left side back by the rear glas window.
Lid for the gasoiline tank.
The lower tray in the mid console

Hi DanneH
  I recently purchased a new lens for the interior light from my local Mazda dealer it was about 10 euros apparently there was still some in stock in the Mazda\'s warehouse in Belgium so it may be worth trying a dealer. The part number is  FAO151351A.
  Daverey

[DanneH]

Hi DanneH
  I recently purchased a new lens for the interior light from my local Mazda dealer it was about 10 euros apparently there was still some in stock in the Mazda\'s warehouse in Belgium so it may be worth trying a dealer. The part number is  FAO151351A.
  Daverey

Thank you for the tip. I will ask my local mazda dealer. Some of the parts are quite cheap. Just bought myself a set of new emblems. total of 4. Costed me total 350SEK ~ £25. On mazdatrix the same emblems costed about $24-40 each.

But some of the parts are not posible to buy new, or ar very expensive.

Thanks again for the tip

[dooby69]

have most parts shaun your welcome to come look and see if what you want is straight would be awkward to tow with no back axle on it thou lol but i can always find other means to moving the chassis

[dooby69]

the lid i have is the metal one with no lock not the plastic one like someone elses pics