T04S Turbo

[Fats]

Just bought a T04S turbo kit of Craig from off here (cheers again), just wanting some info from you boys who have fitted a single tub to there motor. I have\'nt got any oil feed or return pipe\'s with the tub, can I use some of the standard pipe work or do i have to change the lot and what blanking plates will i need when rebuilding it??. If theres anything else needing just throw them in!!

[Grizzly]

What other Mods have you got already?

[TRex]

Have the Turbo checked out first before you go any further.

[Fats]

The mods at the mo are Power FC, panal filter, walbro fuel pump and full exhaust and here\'s the list that will be fitted.

850 primarys
Blitz front mount IC
greddy boost controller
Under drive pulley kit
Clutch
FPR
T04s blower

I\'m gonna have the turbo inspected and serviced if it need\'s it, theres a little play in the shaft nothing to major, is there any prefered turbo specialist that I should take the tub to???

[davehg]

to the list add 1600 secondary injectors with fuel rail, wastegate air filter for a single turbo, boost controller is also handy, porting the engine will reduce lag on the turbo and make it worth while going single

[Grizzly]

http://kgparts.com/index.php?page=kgfuel

[bobert]

Have the Turbo checked out first before you go any further.

I second that. Send it away for an inspection its worth it in the long run.