Can ANYONE here make these guage pods ??

Started by Red and Single, October 21, 2006, 12:56:46 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4
User actions

M@r]{

#30
March 06, 2007, 04:25:38 PM
What sort of price are we looking at Gary?

banned advertiser

#31
March 06, 2007, 04:59:43 PM
Should know tomorrow, after meeting with my guys.

RedRummy

#32
March 06, 2007, 05:30:42 PM
result!

now don\'t go making them too expensive now!   ;)
"Life moves pretty fast....
If you don\'t stop and look around once in a while, you could miss it..."
Ferris Beuller, 1986.

probedb

#33
March 06, 2007, 07:24:08 PM
Quote from: rotaryart.uk.comShould know tomorrow, after meeting with my guys.

Excellent....what sort of guarantee would you do, say if I dremelled out to 60mm only to find my gauges were too deep? Would I be able to return it?

markrx7

#34
March 06, 2007, 07:46:33 PM
sorted :) the 4 guage one would be ideal :D

markrx7

#35
March 06, 2007, 07:47:03 PM
whoops - ignore this post!

Red and Single

#36
March 07, 2007, 07:26:12 AM
Gary, there are pods available for a 52mm gauge already, it\'s the 60mm version for the defi\'s that everyone wants mate.

We\'d like to be able to buy one ready sorted to take the defi\'s, I dont have good dremel skills.
Dave Hughes
13.352 @ 109.03mph (running 0.75 bar  :rollin )
Red \'95 Type R T04S & Bare Arsed  :chat

BleakBoy

#37
March 07, 2007, 08:09:56 AM
Quote from: Red and SingleGary, there are pods available for a 52mm gauge already, it\'s the 60mm version for the defi\'s that everyone wants mate.

We\'d like to be able to buy one ready sorted to take the defi\'s, I dont have good dremel skills.

This is my view as well, only need 60mm version, as i have the Defi Guages ready to go in. I would buy a 3 x 60mm
Project Single Conversion :- Full Steam Ahead :)

Why has more come out than goes back in :2Rolleyes

CraigN

#38
March 07, 2007, 08:54:32 AM
Same here

i allready have a FlyRX7 3x52mm pod but i want 60mm to fit my defi\'s into

markrx7

#39
March 07, 2007, 09:09:27 AM
where are the 52mm ones available from then?? thats what i need!

probedb

#40
March 07, 2007, 09:36:41 AM
Yep, me for the 60mm too for the Defis again....

rx7veilside

#41
March 07, 2007, 10:03:16 AM
i could use 4x52mm

RedRummy

#42
March 07, 2007, 02:09:30 PM
I want a triple 52mm pod...

Any about yet?

How much?
"Life moves pretty fast....
If you don\'t stop and look around once in a while, you could miss it..."
Ferris Beuller, 1986.

banned advertiser

#43
March 07, 2007, 04:39:46 PM
Right, uplaoding now is a update to my pod section.
I am now making the rotorpods in 2, 3 and 4 guages, the 3 and 4 gauge will be ready in approx 7-10 days as moulds are being made.
I will only make them in 52mm with room for them to be made in to 60mm as it is too costly to make 4 moulds 52 & 60mm. Dremelling out is childs play and does not have to be the neatest job as your gauge edge will cover the dremelling out. It will also give you guys the choice as to what size gauge you use and some of you can mix sizes without problem ie 1x52mm and 2x 60mm etc.
Piccys will follow as and when 1st one is out of the mould.

http://www.rotaryart.uk.com/acatalog/Rotaryart_products.html

CraigN

#44
March 07, 2007, 04:51:09 PM
argh Rotor shaped ones :(

look hideous IMHO. Dont suit the contours of the dash at all :(
Print
Go Up Pages 1 2 3 4
User actions