Power possible from a R3 with Standard injectors.

[RobEVo5]

I have been reading the dyno section and many other threads. But nothing jumping out at me to give me the answer.

I am looking to get my car mapped or possibly trying mapping myself:eek

My question is on a revision 3, with full decat, stock twin turbo\'s running non sequential, Greddy intercooler and inlet manifold out pipe thingy (ali twith greddy on it), Uprated fuel pump, HKS mushrooms, Engine possibly street ported but assume not, Aircon removed, along with airpump, along with most things from what I can see as the engine bay is bare. Stock injectors, what sort of power could I be expecting mapped correctly.

I suppose what I am asking is what sort of power can stock injectors deliver with all the supporting mods.? Please specify RWHP or Flywheel

Thanks
Rob

[John Yorke]

On stock injectors you should be able to get somewhere around 280rwhp, cant see the point of putting all those mods in place and not uprating your fuel system - why:xconfused

[Wav]

If you increase the base fuel pressure with an aftermarket FPR you could probably get that value upto around 310-320hp atw using stock injectors all round. Then of course you\'ll be running out of puff on the twin turbos anyway.

Paul

[andysmee]

I\'ve got 280rwhp on stock twins with only an Apexi, induction kits, decat and 3" exhaust. Everything else is stock (well, the important things). The injectors run up to about 85%-90% at the moment at 0.8 bar.
 
That\'s estimated 340bhp at the fly

[RobEVo5]

If you increase the base fuel pressure with an aftermarket FPR you could probably get that value upto around 310-320hp atw using stock injectors all round. Then of course you\'ll be running out of puff on the twin turbos anyway.

Paul

:2eek Very pleased to here this. I have only recently got the car, and the previous owner(3 years), has done a fine job with the mods. Only thing that wasn\'t done was a proper map on it.

If I could get 300rwhp+ circa 350bhp at the fly, I would be very,very pleased. From what I am hearing then the turbo\'s are fairly well balanced to the injectors, which is great news again.

Maximizing the current set up is my current aim, but may think about larger single and bigger injectors at a later date.

But in all honesty the power currently suggested would keep me very happy.:o

Beginning to think to hell with mapping myself and pay someone circa £300 to release all the horses. Just a shame there is no one local to me in East Sussex.;(

[John Yorke]

A quick buz down the A27 will bring you to Portsmouth shouldnt take much more than an hour:Thumbs-up

[RobEVo5]

A quick buz down the A27 will bring you to Portsmouth shouldnt take much more than an hour:Thumbs-up

Great which of the pro\'s are at portmouth ??

[BlitzBoy]

"REworx" my man very good rolling road with Maxy baby as the Mapper Master

[John Yorke]

Great which of the pro\'s are at portmouth ??

REworx have a look at their website, they have a dyno dynamics rolling road and an army of happy customers:)

[RobEVo5]

REworx have a look at their website, they have a dyno dynamics rolling road and an army of happy customers:)

Thanks re-worx amongst others seem to get:Thumbs-up  Will very likely give them a call and get it sorted. Sounds like it would be the best money I could ever spend.

I should have a wideband arriving tomorrow, and wished I had probably just paid the price and got it mapped now, but heyho. If it arrives I will plug it in at least just to confirm its is running very rich as I suspect.

[Scott.T]

Rob,

if you need a hand configuring the wideband, give us a shout.
I have some detcans in a box somewhere if you need em\'. Just to check they tally with the Apexi Knock output.