New toy WILL play :-D

Started by grinder, September 18, 2006, 10:04:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

grinder

prof : so thats what that is for ( i have a resistor on the coupe and no idea what it did !! )

i didnt realise there was one under the glove box aswell

just looked at some old pics of the TII Coupe - and that has 7 relays on the front bar - no idea what all them are for !! LOL

on the very - when you put the side lights on , the lights stay down and the FTP has a light built into it

im sure they only raise on main or full beam

and im pretty sure - that when you flash , they raise , flash , drop ( cooooooool !! )

i have printed off some pages from the FSM to see if i can check the relays and such like :D

more fun :D :D :D

Stu
( oh yeah - the retractor switch does nothing either - so that could be an indication of a bad relay )


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

grinder

just been looking at the EPC

the relays are £17 + vat each - WOW thats a lot - from the yank forum - they say that you can use any relay to be honest

the ECU this is the interesting part over £1600 + vat .. crickey !!

i bet to build a rx7 from mazda spares you would be looking at about £200,000 !!


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Prof

Maplins do automotive relays - they are a couple of quid each - I\'ve used them without any probs
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


Prof

There are some \'joins\' in the wiring loom that runs across the front of the radiator and oil cooler - the water gets in and knackers these - then stuff begins to work oddly or not at all.  Try metering the relay hot sides for 12v from the battery via the fuse - it may be that the wire has corroded and can\'t provide enough juice for the motors or lights.

I had to run a hot wire to the relay to get my lights to work for MOT - still need to rip that loom apart at some stage :(
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


grinder

sounds good prof - no idea what it means - but it certainly sounds good

printed out a few pages from the FSM - so might get out with the meter tonight and see what i can come up with :D


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Jit

it works!!?!! only just saw this!! nice one! bet you must be well relieved and happy!! :)  
Just in time for wet roundabout season too!! although maybe not in a cab lol..

grinder

yeah it work :D - its no where near drivable - but i can start it up on the drive and drool over it :D


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

abmunro

Glad to hear you have it running...

Bet you have been calling me a few choice names.

Anyway I have replaced it with Wide body Starion Turbo.

Great news.

I will sign off this forum now.

Hope you have back on the road soon.

Tony

Bet you still haven\'t told them all what you paid for it!!!

grinder

hiya tony !!

nope not told them - a few people know but thats about it

still got some probs with the car- but the fact that it runs is a start

and nice choice of car - the starion :D

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

grinder

hiya chaps

just keeping this thread alive :D

had a flat on the cab yesterday - so took the wheel off to blow it up and put a spare on one until i found out what is wrong

took it to my dads and blew it up on the compressor - looks like the valve just needed nipping up ( has a nut on the back ) - so if that fixes it :D :D :D

whilst the wheel was off - noticed its got braided lines on the front - not sure about the back - will check that at a later date

fired her up - started on the first touch - so thats really good

still awaiting for the ABS ECU to arrive and some relays for the front - im hoping they will come mid week - so will have more of an update for you lot

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Prof

Quote from: grinderhiya tony !!
 
nope not told them - a few people know but thats about it
 
still got some probs with the car- but the fact that it runs is a start
 
and nice choice of car - the starion :D
 
Stu

Was my guess that you edited out a good one ?  :);)
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


grinder

he he he he

yeah the car was cheap but not the bargain i expected !! - it does need some work and to be honest more than i expected

but we all like a challenge now and again :D

i thought the reason for not starting was it was flooded - boy was i wrong !! LOL

in hind sight - i think i paid a fair price for the probs its given me ( and still is !! )

the only good thing out of all this - if i sell the car next year then the bargain will be passed to the next owner - as i never make money out of cars - i dont think its fair ( when i sold the white one - i think i made about £18 in the end - but that was just to round the price up )

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Mobilemick

u still got the roof cover :)

Mick

grinder

certainly have matey - are you still interested ??


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Mobilemick

Depends on how many pennies ,,  er Pounds u want for it :)

Might try and make the 13th  stu.  is it in warrington

Mick