removal of struts

[Mr J.T]

how easy is it to remove the suspension as i want to wind my coilovers down and there stuck solid so gonna get them off and get the hammer at them. how easy is it to get them out?  :xconfused

[Donato]

If you contact clive he has instructions for removal off, installation of and setting up of tein kits, the removal and set up should be good enough no matter what kind of make you have. I have them but my laptop is fecked, i might have then in my harddrive at home, if you cant get them from Clive let me know and i will have a hunt for them.

Cheers

Donato

[McCARTHY]

dunno why but this post came up twice?

[McCARTHY]

suspension is easy, 3 nuts at the top, few at the bottom. WD-40 could be handy for the bottom ones the tend to get a little stuck with grimyness. Make sure the car is braced properly though last thing we want  is a squished MRC member

My HKS coilovers got stuck like this i used a large monkey wrench on the bottom ring but i left mine on the car as i had nothing to brace them with once they were off. you shoudd find that once the bottom ring moves the top should be easier to move.

What coilovers do you have?

[clive]

how easy is it to remove the suspension as i want to wind my coilovers down and there stuck solid so gonna get them off and get the hammer at them. how easy is it to get them out?  :xconfused

Here you go mister, the missing instructions that Donato is talking about.

http://www.mazdarotaryclub.com/forums/showthread.php?t=19868

Hope this helps

[Mr J.T]

cheers donato and clive

ive got same as you bud HKS. ive hung off em a couple time on the car but wont budge. out come the axle stands and a great wackin hammer