Houston we have a .............

Started by grinder, May 15, 2006, 07:29:58 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

grinder

NEW CLUTCH :D :D :D :D


new clutch has been fitted - and it certainly grabs - managed to stall it though on the slip road in traffic - very bad !!

its very juddery at the mo - im assuming this is the bedding in cycle

but what a difference it makes - it feels like it grabs sooo well - even at 60 in 5th , it steadily pulled ni traffic

drove to and from WGT on no boost - really bad weather conditions :(

Bring on RSIII :D :D

Just thought i would let you all know

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

kev-yorks

Regards Kevin

grinder

thanks Kev

and still a big thanks to you for doing the welding - no point having a clutch with a car with NO MOT - so thanks again for that

but yeah - car is taxed , insured , MOT\'d , clutched :D and ready to play

just need some nice weather now :D

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

kev-yorks

Thats the problem summer was last week thats it now for the sunshine.
Kevin
Regards Kevin

Grizzly

Don\'t go and Blow it up !!!!!!

:)

shaunwil

well done, on to the next issue :p

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

oldone

Hope the Yorks welding holds when you launch.... :Giggle

Ricco_04

:3gears-lh  :Thumbsup!  :guinness  :evillaugh  :cheers  :Viking  :chat  :Party

(smilies say it! :D)

grinder

more worried about the diff now !! LOL

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Prof

Nice one,  so how many horses are trying to escape through the new clutch then ?   :D  :D

You\'ll be dragging at RSIII now - no excuses.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


TRex

#10
-------------------------------------------------------------------------------------------------
{Quote} new clutch has been fitted - and it certainly grabs - managed to stall it though on the slip road in traffic - very bad !!

its very juddery at the mo - im assuming this is the bedding in cycle

but what a difference it makes - it feels like it grabs sooo well - even at 60 in 5th , it steadily pulled ni traffic {Quote}

---------------------------------------------------------------------------------------------------

 This is what a 400bhp(rated) clutch feels like mate.......   :D

 Glad you like it and are smiling again mate...   :3gears-lh
TRex the Ecowarrior - Recycling exhaust gas and using it to create energy. Just doing my bit

grinder

its superb matey - really like it - makes driving the car sooo much different

i spoke to the guy who took my old clutch off - loads of life in it - but shiney in places where its been slipping

he said my flywheel was OK - and we checked the diff and gearbox oil - and both of them are OK ( the diff looks like new fluid he says :D :D )

pip reckons im running about 240 at the fly with the mods - although he said with a microtech i can prob get about 280 with the set up i have

next project is the DTSS thingies - as they are SHOT at .. took pip about 5 seconds to point it out to me :D :D

Stu


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

retrobate

You\'ll need more than a new clutch at RSIIi with \'just\' the 240 Stu! :Giggle

grinder



1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

retrobate

Cheap shots are always the easiest! :p