Boost Saga

Started by BlitzBoy, October 08, 2003, 02:51:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

awheelhouse

I\'ve just ordered some 65mm & 70mm silicon hoses from Chris at RE:Worx, tel 02392 831213. They were quite good value at £25, I needed a bit more than you require, so I\'m sure the bit you need would be quite cheap.

I\'m sure if you tell him what bit you need he can cut a bit the correct size and post it to you. I think that hose is 70mm, but check it!

Andrew

BlitzBoy

Cheers Andrew I must just do that
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

BlitzBoy

I thought I might update u guys on this, I fixed the problem permantly with the greddy hard pipe intercooler kit and has been running sweet until last week, then i started dropping boost again :( I thought cant be, so I took all the pipes off and the plastic pipe that comes off the twinturbo outlet, found the original rubber coupling had a dirty great split in it where by the jubilee clip had rubbed up against causing the split. I repaired it , sweet the car runs perfect, it spools up even quicker then when i bought it, getting full booost 10 psi at only 2000 rpm, f**k me im having a hard time keeping the car on the road in this weather coz its so quick
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

BlitzBoy

Here is a diagram of where i found the 2nd boost leak
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Shaq

Blitzboy,

yo yo! how you doin ?

now my car is playing up, it boosts up fine on the first turbo then drops to 0.4 on the second ? i checked all the vaccum hoses took of the plenum ended up breaking the Double throttle control solenoid ! :reallymad

i have got some vaccum hoses i was gonna replace alot of the rats nest with.

all the intercooler piping seems ok ?

Any suggestions ?



Shaq
12.7 on stock twins @ 1 bar (i reckon i can do better!)

BlitzBoy

Well the only way you can check the second boost leak i had was to take the piping and the coupling off to visually inspect it.
0.4 bar is only 5.8 psi which is less then safety boost, safety boost is 7psi anything less inducates a boost leak my man, if you are around next Saturday come over and i will check it for ya
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Shaq

ok cool thanks i will be changing the rats nest tommoro night i hope i dont break anything ! this time  :eek:

You going to the gym tonight? i should be there about 7:30 ish


Shaq
12.7 on stock twins @ 1 bar (i reckon i can do better!)

BlitzBoy

yep i will down there about 6.30
Good luck with the rats nest u need it lol
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Shaq

LOL !

Sounds like you don’t have any confidence in me ! oh well neither would I ! LOL !!!      :rollin

see you at the gym!



Shaq
12.7 on stock twins @ 1 bar (i reckon i can do better!)