Engine squeak on cold starting

Started by robedwards99, February 16, 2006, 09:34:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

robedwards99

If my FD has been sat for a couple of days, there is a pretty loud squeak that comes from the engine just as it first fires after turning over.

The engine has done less than 3000 on a rebuild so it should be in tip-top condition.

Does anyone else experience this?? Is this normal??

RX7... The Deep Pocket Rocket...

Paul-Tll

fan/ drive belts maybe? they get damp or they could be \'old\' and \'In the grove\' like me!
Paul.. :WaveBye
The- \'RED KNIGHT\'-sport

92 R1

robedwards99

Quote from: Paul-Tllfan/ drive belts maybe? they get damp or they could be \'old\' and \'In the grove\' like me!
Paul.. :WaveBye

Possible I guess, it\'s not like the typical squeaky fan belt noise though.

This is a short sharp noise, quite painful sounding!, less than a second long.

RX7... The Deep Pocket Rocket...

allstaruk

Check the tension on the belts, back the alternator one off first and then try starting it. It will only take you about 2 mins with a  10mm spanner iirc.

robedwards99

It\'s gonna be difficult to tell if that is the problem or not as I only ever hear the noise for half a second when I start it up after it\'s been stood for a couple of days.

If people are sure it\'s a belt problem I won\'t worry too much. I was just concerned that it might of been something inside the engine making a nasty screech.

If anyone else can elaborate on possibilities I would be grateful :)

Rob.

RX7... The Deep Pocket Rocket...

ro284

Hi Rob, sounds like belts, i am just about to fit a new set on mine, but they are not that worn if you get stuck,
cheers Bob