scoot bonnet??

[skybusr34]

this is the scoot bonnet right??  if yes what are the fitment like?

[ScuttleRX]

Yup thats the Scoot bonnet, if its an original Scoot item fit should be very good. Think Gary at Rotaryart.uk.com does a good copy as does Chuck from RotaryExtreme

[banned advertiser]

If that is carbon then its not scoot but one from USA. Scoot only make fibre glass.

[banned advertiser]

heres a link to ours, with small discription of what we had to do to make an usa one fit correctly.
http://www.rotaryart.uk.com/acatalog/Carbon___Kevlar.html

[skybusr34]

ok cheers. will be in touch. either a bonnet or headlight vent.  trying to picture the bonnet with burnout kit.. hmmm

[pete sparrow]

PM\'d you mate.

[Warthog]

I have one of Gary\'s fitted on my FD and it is a good fit. Very pleased with it.

[michaelb]

Hi Warthog

I hope you are well.

Can you tell me who fitted the bonnet for you and how much was it ?

It is one thing to buy it but to have it fitted well is another..

I may want to treat my self to one…

Regards,
Michaelb

I have one of Gary\'s fitted on my FD and it is a good fit. Very pleased with it.

[michaelb]

Hi

I may treat my self to one of your bonnets in the summer.

http://www.rotaryart.uk.com/acatalog/Carbon___Kevlar.html

Do you fit and re-spray?  If so how much for 96 White FD? Do they come in black?

Regards,
Michaelb

heres a link to ours, with small discription of what we had to do to make an usa one fit correctly.
http://www.rotaryart.uk.com/acatalog/Carbon___Kevlar.html

[banned advertiser]

Dont fit at the moment, but will have a word with a man that can.

[Warthog]

Sorry for not getting back to you on this thread but been busy working long hours. I did the fitting myself. The only things I had to do were cut out the rear inset sections for the air flow from the intake to blow down to the rear of the engine. I also put another access hole in the rear area for easy access to refitting the washer jets. The washer jets  hole do need a slight adjustment with a needle file to cut a slot for the washers to fit perfect ( 5 min job ) For added safety I fitted a bonnett arm retaining plate over the inset locating hole for your bonnett arm. I also changed the retaining screws for the bonnett front catch to stainless ones. All minor stuff, how I wanted it. My mate got it resprayed for me at a trade only paint shop. They do all the GT race cars. Price for that is not for here.
HTH. Oh, and the air flow does work keeps every thing nice and cool.  :Party

[richard cash]

how are the carbon copys fitment like then, as i take it you cant file away like fibreglass as the weave will be ruined

[Warthog]

No idea on CF but the slot for the washers is cut into the side of the hole only about 2mm as is hidden under the washer unit when you fit it in.HTH. :wave

[banned advertiser]

Pins fitted and sprayed.
The bonnet is put in the oven and heated, then etched, then primer, then 2 pack. So its properly, if you get someone just to spray it as the quality is good enough for that because its f/g it will flake. So be warry of cheap spray prices.
Been to 2 companies and both almost identical.
£300 sparyed and pins.

[michaelb]

Many thanks for the info

Regards,
Michaelb

Pins fitted and sprayed.
The bonnet is put in the oven and heated, then etched, then primer, then 2 pack. So its properly, if you get someone just to spray it as the quality is good enough for that because its f/g it will flake. So be warry of cheap spray prices.
Been to 2 companies and both almost identical.
£300 sparyed and pins.