cars arrived!

Started by prisspringle, December 23, 2005, 02:05:28 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

grinder

the guy is called Shaun - posts as shaunwuil

we did find it in the end - then the new one with just sports cars in - they must have well over £200K stock in that place

then had a nice trip down the A59 back home :)


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

prisspringle

I wonder how bad they\'d pass MOT if ya bought them and took them to an MOT test centre.

I thought that was his name, i\'ll keep everyone informed about what happens with the car. We\'ll have to have a meet up once i\'ve sorted the car.

Who\'s going to rotorstock FC wise? and how much are tickets normally?

Chris

grinder

i reckon that you are looking a few months to get it fully sorted

but you might beable to get it drivable in less time than that - a real shame we couldnt start it today :(


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

prisspringle

well it all depends on finding/borrowing a welder and getting on with it. it was such a kick in the teeth after all that work!

you couldn\'t get me a battery like you had in the rover for the same price you said could you?cheaper the better, that the FC way :P

the list of parts i need to buy isn\'t too bad there all lil bits since i\'ve got the back seats sorted.

chris

grinder

let me ask about a battery for you - the hassle is just getting it over to you :(

i will get back to you  :D


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

prisspringle

yer i\'m sure i can sort something out!

look what i just found on ebay :\'( : http://cgi.ebay.co.uk/Mazda-RX7-FC3S-1991-Rolling-Shell-Black-VG-Condition_W0QQitemZ4602608199QQcategoryZ52640QQrdZ1QQcmdZViewItem

that would be perfect :\'( and that cheap( even by yorkshire man standards) its just the 200+ quid for delivery! i wish i had a car and traior or i\'d have that and swap things over.

chris ( now miffed!)

FD3SNuttah

yeh it costs 40 quid to hire a flat bed! then all you need a mate with a towbar and a large car!

prisspringle

*goes off to ponder*

chris

grinder

it should be an easy car to tow as there is no engine in it

its the fact thats it BLOODY MILES away matey

not a bad car to start with though :D


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

prisspringle

yer thats the thing that bothers me, but if it goes silly cheap then i may have to... :P

i\'m right in thinking that the t2 gearbox wont mount to an egi engine? we cant deside what to do if we do buy it, we can buy a T2 engine ect but they dont seem cheap enough and the engine i have in mine is to good to just sell on.the other is to swap egi bits over and sell the other one for scrap, or swap egi bits then repair the red car and sell on.

decisions decisions......

but i\'m still waiting for a reply from the seller, not sure if i\'d get it if the car isn\'t UK reg`d.

grinder where abouts is keighly trade centre then?

chris

prisspringle

#70
they just e-mailed me back, the car isn\'t uk reg, but it has the paper work so i could, he also sent me some more pics it looks in good condtion apart from missing a front bumper.

does anyone know a van/car rentail firm that lets under 23yr olds drive there cars... :Hammer

chris

:EDIT: scrach that its just been ended early never mind wheres my welder :P

Wav

Quote from: prisspringlethey just e-mailed me back, the car isn\'t uk reg, but it has the paper work so i could, he also sent me some more pics it looks in good condtion apart from missing a front bumper.

does anyone know a van/car rentail firm that lets under 23yr olds drive there cars... :Hammer

chris

:EDIT: scrach that its just been ended early never mind wheres my welder :P


Nope, but Exeter is miles away, so £200 delivery isn\'t bad at all. I\'m pretty sure that\'s is how much it would cost you anyway, plus your time.

I will have another think about any hire places around your area, being a Keighley lad and all i\'d like to help out ;)

Paul

prisspringle

yer shame its gone would of been a good ish money spinner plus that would be another rx saved from the tin worm.

yer i know what you mean about hire places, and any help is welcome!

chris

FD3SNuttah

ah mate, nevermind!


at least im not on my own here!

prisspringle

lol true, atleast its saved me from having to lift an engine and gearbox and swap over wireing looms and fit the egi diff........

almost makes me glad i\'ve not got it!

chris