Rubbing

[Jodypamplin]

have hopefully solved this - no heating and re-moulding of the plastic arches though ... the trusty 2x4 and some levering  

basically the front left wheel was very close to the plastic arch, and also to the metal sub frame. after removal of the plastic, which is significantly worn after a week of dirty rubbing, it was evident that the metal would be in contact with the wheel, and possibly cause even worse damage! so grabbed a long 2x4 and levered the thin metal edge away from the wheel, basically bending it, and there is now, hopefully, adequate clearance. not ideal, but a more hands on approach to an irritating problem.

funny that its not the same on the right wheel  :confused:

anyway time to  :3gears-rh