Calibration

Started by johnf, August 29, 2003, 04:42:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

johnf

My 3rd gen was imported new by it\'s previous/original owner and came with a MPH only speedo.

It appears to be out - I\'ve had ppl follow me and when I\'m showing 30 they are doing 35+. I also went on a regular journey today that I know is 90 mls, only in th rex it showed 81.

Bearing in mind I got a speeding fine for doing 40 in a 30 I\'m a bit pissed, so I think I would like to get it fixed.

Any suggestions who to approach and if it is likely to be a big job?
I live in the midlands.

The only good thins I spose it that my overall mileage could be showing 10% less than it actually is:)

Thanks
I started with nothing and I have most of it left

BlitzBoy

John  a device is normally installed behind the Instrutment binnacle to convert the pulses from Kmph to Mph, it has three wires tapping into the speedo wires, this is probably faulty , you can get a new one from various SVA conversion companies, or the other problem could be your rims, are you running non standard wheels?? coz if you are running a larger rim like 18in or higher this can throw the speedo out
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

bnaellis

The older convertors are not a accurate as the ones used nowadays.

rgds

johnf

Thanks for the replies:

The car is running on standard wheels and tyres.

It\'s a late 98. so I hope that\'s not an \'older\' converter.
I started with nothing and I have most of it left