Trust TD06 Turbo

[oRi]

Hey Guys

Looking for some information on the above turbo. Anything anyone can tell me about it would be useful.

Cheers

Stu

[sdminus]

i think there are 2 versions of this 20 G and 25 G

[oRi]

Dont know which one i am thinkin of so info on both would be great. Might have found something on the 20G, but dont know if its any good yet.

[sdminus]

The TD06-25G turbo is the next step below the T78 turbo that is used in the Greddy kits. Mitsu turbos are very reliable and are efficient to very high psi(25+), that is my guess as to why all the time attack cars use them. Also they spool relatively quickly for a non ball bearing turbo. As far as exact spool time, Im not really sure, I dont know of anyone running that kit in the US. My guess as compared to other Mitsu turbos that I have seen is that it would start to make boost around 2K and full boost by 3.5-4K.
i lifted this for ya

Scott

[oRi]

Thanks for the info.

Any idea what the achievable BHP would be through that turbo?

Cheers

Stu

[sdminus]

Would need a compressor map for that info and i cant find one.

Scott

[oRi]

Is this the compression map right?

Stu

[sdminus]

I will help ya learn something here bud

http://www.dsmtuners.com/forums/showthread.php?t=128139

Read this

and this

http://www.hotrod.com/techarticles/engine/113_0312_turbo/index1.html :guinness

Scott

[iaint]

Nice links, very useful.  Thanks!

[matto]

does anyone know what power this turbo set up will produce with the right supporting mods?:wave

[TonyC]

My car has one, but I can\'t give you any specifics on power yet as it needs the fueling sorting, boost controlling and proper mapping from Carl. Won\'t be done for a month or two.

[Freddy]

It really depends on the hotside. Which one is it;

I think Trust/Greddy (assuming that is the maker) do the following TD06\'s;

TD06-SH 18G
TD06-S   20G
TD06-SH 20G
TD06-SH 25G

The most common one is - TD06-25G, this turbo commonly produce circa 400hp. Although I saw a set up running a TD06-25G in Japan running 440 atw.

You\'d find these kits are best for circuit usage and not drag as they do not have a big hotside and spool quickly given that it is non ball bearin technology.

Hope that helps.

[matto]

hi yes thanks for the replies it is a td06 25g so about 440 atw is the maximum for this turbo ? when would it start to spool? it is the trust/greedy kit i was looking at sorry for all the questions
thanks for the help:D
regards
matt

[Kieron]

My TD06-25G hits 1BAR boost at 4K

[jetpilot]

From memory, RE use the TD06 in their circuit car with excellent results!