Hissing.

Started by Brett, July 03, 2005, 01:36:36 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Brett

I get a hissing noise in the cabin when under gentle acceleration (dont know what its like WOT as the engine is not run in yet) is this a normal TII noise, or should I be on the look out for a split hose that escaped my attention?
Brap Brap Brap Brap

turbomaz

I had the same thing on my Tll found out the main turbo pipe had worked a little loose.
Hope you get it sorted...

Donato

Have you got a mechanical boost gauge in the car? If you disconnect the vacuum pipe from the back it makes a sucking/hissing noise when the engine is running... or it may have had a vacuum pipe for one just left under the dash somewhere...

Brett

Checked all the pipes in the engine bay, everything is properly sealed (I should bloody well hope so considering I only put it all back together this time last week!) and there are no splits.
 No sign of it having had an after market guage fitted either.
Brap Brap Brap Brap

grinder

sounds like what mine was doing - but i reckon that it was the boost gauge at fault


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Brett

The plot thickens....
Just been out and had another look at things, every pipe is fine.
Brap Brap Brap Brap

grinder

#6
could be worse.....could be my car LOL

[stupid mode]

are you sure its just not the turbo spooling ??

the better half always says mine sounds like a hair dyer ... so it could be something an nothing matey


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Brett

Nah, its something other than usual turbo sounds, I\'m wondering if its the BOV noise coming through the K&N?
Brap Brap Brap Brap

Oedipus Rex

dunno about FC\'s but my FD will hiss when the turbo is spooling but I\'m not generating pressure, ie if I have my foot down a little, the BOV stays open so the turbo can keep spooling but not pressurise the sytem. This means when I put my foot down theres bollocks all lag.

Only started to hear it when I put my cones in for the stock air box.

antnicuk

i find that if there is a gromet missing or out of place slightly in the firewall the air coming through will hiss as there is quite a lot of air pressure being forced into the engine bay trying to get out.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


Brett

Well I cant hear the hissing anymore, so unless it comes back I think I\'ll ignore it.  With a history like this cars got it was bound to have a few \'niggles\' running in.
Brap Brap Brap Brap