Is this the standard ECU for a 92 FD

[TonyBlair]

Can anyone tell me for definite whether or not this is a standard ECU for a 92 FD (jap import)?

Thanks.

[TonyBlair]

A close up.

[sdminus]

I would say that it used to be untill Knight Sports upgraded it
Scott

[Freddy]

Standard ECU upgraded by knightsports on;

12/1/2002

Mapped to 0.9 bar of boost.

It also has the fuel cut defencer so your car should not cut off at 180 kmh.

[TonyBlair]

Thanks guys! As always, I much appreciate your advice.

Thanks again.
Jon

[RX-HEAVEN.COM]

Please be careful. Knightsports tune their ECU for Jap petrol which I believe is 100 octain.
I have a customer who bought 1 of these S/H & his car went very well for 3 days & then destroyed the engine through detonation

[TonyBlair]

Thanks for you comments.

I\'ve been running this ECU for several months now, so I guess it\'s OK on Optimax.

Cheers
Jon

[RX-HEAVEN.COM]

Just because you have been getting away with it please do not assume that all is OK.
So far we have had quite cool weather & rises in temperature can introduce detonation. Detonation is like a knife edge, you go up to that piont OK & when you cross that point it all happens.
Detonation kills our rotary engines very easily, especially if your engine still has the Mazda 3 piece tip seals. The later 2 piece tip seals are better but can still be easily damaged.
If you need to use this ECU, I suggest that you get on a rolling road where they can independantly check for detonation.
Good luck!!1

[TonyBlair]

Hi mate, thanks for your comments.

I have recently upgraded to the Apexi P-FC and as soon as possible I will get it down to RE:WORX to get it mapped properly. It\'s number 1. on my list of things to do!

The reason for asking about what ECU I *did* have in the car was because I want to sell it and I want to make sure I don\'t mis-advise perspective buyers.

Thanks for all your info and advice.

Cheers
Jon

[RX-HEAVEN.COM]

The only way to go!!!!
Jeff will do a good job of mapping