Fitting An Induciton Kit ??

[grinder]

Right then guys - let see what info we can get

I could do with a new air filter for the car - and basically none of the local places sell them

so im toying with the idea of an induction kit ( cone filter )

seen some on ebay for not a lot of money ( inc a knightsport one )

SO.....

are they easy to fit ?
what happens with the pipe from the air pump ?

errr thats about it really

not looking for perforamce gains ( should get about 4bhp tops ) - mainly looking at decluttering the engine bay

is this a safe route to follow - or am i wasting my time ??

im hoping to run this with a fully decat exhaust system

idea/suggestions would be great

If we can make this a good thread - i will make it a sticky later on - or will add it to bretts thread about mods and make that a sticky

having looked thru the 2nd gen section - we seems to go over things a lot of times - so its about time that i pulled my finger out and sorted this section out once and for all ( he says LOL )

thanks

Stu

infact - im gonna start now and see if i can get some threads in a neat order for ease of reference ... this should be fun

[colinrx7surrey]

im looking into doing exactly the same myself stu--------
im looking into these 2:-

1.k@n induction kit
2.ram air forced insuction kit

some info on the k@n kits avaliable---------

K&N Fuel Injection Performance Kits (FIPK)

Guaranteed Horsepower
Aerodynamically engineered non-metallic rotationally molded tube for lower air temperature and less intake sound
Engineered to specific vehicle design
Easy to Install, usually in 90 minutes or less!
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Available for many popular vehicles
Million Mile Limited Warranty
 
 
K&N 77 Series High Flow Intake Kits

Guaranteed Horsepower
Designed to provide Trucks and SUV\'s more horsepower and acceleration  
Built for performance and show utilizing the highest quality components
Engineered to specific vehicle design
Easy to Install, usually in 90 minutes or less!
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Million Mile Limited Warranty
   
       

K&N Typhoon Air Intake Systems

Guaranteed Horsepower
Designed for increased performance for sport compacts, utilizing the finest quality components
Available in high-quality finishes
Some applications available in cold-air versions
Engineered to specific vehicle design
Easy to Install, usually in 90 minutes or less!
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Million Mile Limited Warranty
 
       
 
K&N AirCharger® Performance Kits

Guaranteed Horsepower
Aerodynamically engineered non-metallic rotationally molded tube for lower air temperature and less intake sound
Engineered to specific vehicle design
Easy to Install, usually in 90 minutes or less!
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Available for many popular vehicles
Street Legal in most US states (not street legal in CA)  
Million Mile Limited Warranty
 

 
K&N 57i Induction Kits

Guaranteed Horsepower
Economical induction kits designed to provide more horsepower and acceleration
Available for many popular European vehicles
Easy to Install, usually in 90 minutes or less!
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Street Legal in most US states (not street legal in CA)  
Million Mile Limited Warranty
 


......and for the ram air max flow kit

MAXFLOW FILTERS SYSTEM
RAMAIR Max Flow filter systems have been technically designed and developed to increase the air flow which maximises the engine\'s performance.
The engineered design of the housing in combination with internal filter utilises the cold air flow and in turn provides your engine with more power and torque.
At the same time the Max Flow filter system gives you an improved engine bay look and a superb induction roar.
Fitting instructions included to ease DIY fitment
Cold air ducting kit included


hope this helps
cheers col

p.s wen did u become a mod grinder?

[Brett]

If you buy the K&N induction kit it comes with a fitment for the airpump hose.

[grinder]

so if you dont buy a K&N where does the pipe go ??

and col : i have been a mod for probably the last 12 months

[colinrx7surrey]

sorry mate i didnt even notice---lol lol

[Brett]

U will need to fit a little crank case breather type filter to it.  I have one if you need it.

[grinder]

brett , stick my name on it and bring it to RS

cheers fella

and was thinking about something like :

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=52640&item=4551968157&rd=1

[Brett]

Yeah, if you go for that one you will need the other filter.  txt me on Friday night to make sure I\'ve packed it!

[grinder]

no probs matey

so what did you think about the air filter - i dont think its anything facny though

[Brett]

TBH A filter is a filter, as long as you steer clear of the steel mesh ones you should be alright.

[grinder]

why stay clear of steel mesh ones - i thought thats what the K&N ones were ??

all confused now

[TRex]

Take this conversation elsewhere you two...  
You are tempting me to jump in and add my usual 2 p..... :flamed

[Brett]

IMO the steel mesh ones dont offer enough filtration.

Trex, cmon, jump in, there hasnt been a good flaming on here for weeks.....:rollin

[grinder]

come on trex - we need you opinion now matey !!

[Grizzly]

Hey Stu,

have you had a look at your Motor?

Chris