PFC fitted + remap = plenty of bhp

[babz_audio]

this wendesday had the car taken to WGT and got the Apexi Power FC and commander fitted, compression test results were good and had it remapped

was mapped to 0.75bar due to needing bigger injectors but WOW, it has made a big difference, its much faster and smoother than before and is pushing a healthy 430bhp approx

Pip advised bigger injectors with fuel rail, uprated pump and another mapping session at 1.1/1.2 bar and it will push over 500bhp...

just trying to sort things out before RS so i can take it on the 1/4mile and see what it can do

Would recommend WGT, it might be bit pricey but he sure is damn good

anyone got any injectors lying about or an uprated fuel pump...:p

[sdminus]

Any chance of seeing the Dyno?

Cheers

Scott

[babz_audio]

its in the car, will get it scanned when i get a chance, Pip said i should do the mods so will be going back very soon

[sdminus]

Nice one mate, it\'s looking good. Was it 430 at the fw or rw?

[babz_audio]

it was at fw, Pip said it defo needs bigger injectors so he didnt wanna push for any more boost...

feels amazingly quick tho, so money well spent

[sdminus]

If you dont mind me asking what is the spec of your motor.
Scott

[babz_audio]

HKS T04R
External Wastegate
Manifold, down pipe and exhaust with decat (HKS)
twin plate clutch
Trust FMIC
BOV
Blitz Dual Solenoid Boost controller
Now with PFC but before was running standard ecu that had some extra chips in it :confused:
HKS Filter
Some extra bits and bobs i cant remember or just dont know about yet...
then of course, extra gauges, RE-A kit, mazdaspeeds, Teins, rear bars, front strut, carbon bonnet, sleek lights...etc

[babz_audio]

some clips of it here, this is before PFC

http://www.mazdarotaryclub.com/forums/showthread.php?s=&threadid=13367

[bnaellis]

Told you it was nothing like those silly figures publish before. rewox should have secondary injector kit inc fuel press reg etc etc.

[Warthog]

Nice one mate, look forward to seeing you at RS.:wave

[asp]

what size inj u usin now,what size u goin to get?
sound like u spent the money very well

[gsb876]

Excellent news Babz good stuff

[nikp]

Hey! I was at WGT on wednesday! May have seen you...mind you, i was still in a daze at being told that my fuelling was wildly off!!

[eatmyrx7dust]

That sounds amazing...I have virtually the same set up but already have 1600 injectors fitted and engine ported and running at .9 only get 310 rwbhp. Can you post the print out.
I think I am going to have to go back to WGT and ask for my money back !!

Only your fmic is different...could that make a 100bhp+ differrence ? Mines a bigger SMIC.

Are you sure you have a T04R and not something bigger ??

[Oedipus Rex]

Originally posted by eatmyrx7dust
That sounds amazing...I have virtually the same set up but already have 1600 injectors fitted and engine ported and running at .9 only get 310 rwbhp. Can you post the print out.
I think I am going to have to go back to WGT and ask for my money back !!

Only your fmic is different...could that make a 100bhp+ differrence ? Mines a bigger SMIC.

Are you sure you have a T04R and not something bigger ??

that sounds very low to me. I\'ve got a ported engine a straight through exhaust, large downpipe, apexi ecu, large rad and smic and I\'m runnin 317 rwhp at .7 bar.

You should be getting more than me at .9 with a big single compared to my stock twins. What kind of port have you got?