Greddy Bend Diameter ???

[shaunwil]

Well im taking off the air pump to send away to pip to get something in it fixed as well. Hopefully it shouldn\'t take more than a few weekends to sort out. Im not removing as much as you and using the original plastic y pipe (for the min)

Has anybody got any good how to\'s on removing all the intercooler and radiator. Seems to look like a start at the top and work down but just wondering if there is any interesting points ??

Cheers for all the info.

Shaun

[gavin]

im currently doing the same - but fitting custom mount intercooler ally rad and a few other bits n bobs, still waiting on other hoses to come so i can get on, trying to get the car back on the road for april,

[sdminus]

shaun. I would start off by removing the air box and various pipes to it. then the battery, then intercooler.  The rad only has 2 nuts which hold it down. do you have any diagrams..... or need
Scott

[shaunwil]

I\'ve got the 1993 workshop manual pdf, and been reading it. Trying to get as much info before it all comes out. The intercooler has been modded to sit lower, so that may make some more problems. The battery isn\'t a problem now ! Got a pure lead in the boot all wired in

I suppose its that first look over the ledge thinking what have i done i need to get over. Will definately get there and hopefully should be in and tuned by rotorstock !

Although may want to do a couple of other things before i have it tuned. What are the next size injectors available ?

Looking forward to it running at more than 0.5 bar (yep, you read it right, still only at 7psi !!! from rebuild)


Cheers Guys

Shaun

[sdminus]

it does sit very high as a standard unit which is why i got the nx kit. It may cause you problems with the air con condensor.  it may be in the way.
once air the air box and ic is out it should look like this. this is a tad messy.... LOL

[sdminus]

junk that and it changes to this

[sdminus]

i moved mine so its sits tight to the front cross member. Its about 1inch further forward which helped with the rad.
SCott

[shaunwil]

I am looking forward to getting it done. Very impressed with the job you did !

Shaun

[shaunwil]

Just for anybody interested i\'ve just ordered some alloy bends. When searching on google i only found to likely company. This seemed to be the best.

http://www.woolfaircraft.com/

Shaun

[shaunwil]

Had an email from woolfe saying that they only supply to canada and usa. What a complete farse. Whats the point in having international shipping on their web page. Talking to a company called tube craft in the uk that may be able to help. Depends on the wall thickness available.

Keep you updated !

Shaun

[shaunwil]

Got my Hose clips today. Very nice.Proper Bolt clips, rolled edges and wide



From a company in birmingham called holdtite uk. Bit overkill, but extremely good quality.

Looking at taking the bits out on the weekend. And so it begins............

Shaun

[grinder]

if you need a hand shaun - give us a shout - i can just about handle a spanner

[shaunwil]

lol, i hope i can too

Shaun

[Laeeq]

I got them hose clips from Abbey hose place in Dagenham, in Kent.   Top nosh, value for money, extra wide and tigh them once and forget about it forever.

got the piping sorted for my water injaction system from them.   They may be able to help you with pipping for sure, very friendly and helpfull.

Cheers

[shaunwil]

Cheers, I think pip may be coming to the rescue on the pipe front. Just need to have it tig welded at work the !

Shaun