help with fitting boost gauge

[J.j.]

Hi guys,
Just received the Re-Amemiya boost gauge and mount I ordered.
Have a couple of quetions though.
What sort of wirings do I need to buy to fit it?
The gauge\'s not secured on the mount.  There are two bolts going through the housing, but there aren\'t anything to secure them from the other side.

Cheers

[Donato]

Black and white cables are for the light, you can run the black to a suitable earth point, the positive cable (white) you can run to the light that illuminates the cigarette lighter when the side lights are on, just use a scotch connector.

You will need vacuum hose (6mm i think) and a t piece to connect the actual boost gauge.

take the gauge to a hardware store and im sure they can give you a couple of nuts to secure it with.

cheers

donato

[J.j.]

Cheers Donato.
Thanks for the help!!  

[Donato]

No probs.

Meant to say! dont overtighten the nuts holding the gauge on as its pretty thin fiberglass!!

cheers

donato

[jonrx7uk]

If you run the earth wire to the earth feed of the cig lighter, doesn\'t the boost guage dim with all the other dash lights?

?

[Donato]

good point john, never thought about it as i never dim the dash lights. I have aftermarket dials on which have a seperate dimmer which i have never used either...