Stock clutch good for 320 bhp??

Started by J.j., February 14, 2005, 06:51:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

J.j.

Hi guys,
Thinking of changing my clutch.
With the plans I have, Im not gonna go over 320 or 330 bhp.
Will a stock clutch take it?? If not, which clutch should I go for?? and roughly how much??
The clutch I have now is a funny racing clutch.  called peddle, paddle clutch??  Any idea if it\'s worth anything??
Cheers

rx7veilside

standard clutch is fine at thet power only at around 400fly wld i look at alternate as they can be a bit of a pig in traffic and sometimes noisy

J.j.

Standard\'s good for 400??  They really that good?  Was told that anything over 280 would need an uprated ones.........
The clutch in my car is an absolute pig to drive and v. v. noisy..

rx7veilside

sorry didnt make myself clear standard clutch will take abot 350 but at around 400 prob wont last long depending on how u use it

J.j.

Cheers rx7veilside, so oem one\'s all I needed then.

Smifta

Hi there,

I had a stock clutch on my car when it was imported, the car had 39k miles on it, and was running 320 fwhp. It was already slipping badly at this point, I then upped the boost and got re-mapped for 370 fwhp, the clutch fried after about 2 pulls.

I ended up getting a new single-plate cerametalic clutch fitted by Re:Worx. They now sell and fit these direct. It\'s small amount heavier than the stock clutch, is single-plate and not a bitch to drive. Geff has run this clutch in his 600 bhp drag car, so it\'s tough too. A great compromise.

I appreciate my clutch was already fried before I upped the power even more. But at 320 bhp I doubt it would last much more than 35-40 thousand miles. Depends what you\'re after really. I went for a up-rated clutch as I have more plans for the car in the future, for that extra few hundred quid I\'ve got something proven for big-power.

At the end of the day, it\'s your car, and your call!

Hope that helps some.
Alex.
310 atw. Stock twins. Mazdaspeed GT-Concept.

Mazdarotaryparts

#6
Hi Jj

I have to agree with Alex that a stock one will struggle .

We now sell an ideal clutch for thgis use that sits nicely between stock and the exeddy\'s that we sell.

These are Centerforce duel friction clutches that will give the same pedal pressure as a stock clutch, doesnt "rattle" and also give you the same smoooth pull away that a stock clutch does unlike the "race" clutches that need mastering.

£492 +vat , which isn\'t crazy money for a 500bhp capable clutch.
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

J.j.

QuoteI ended up getting a new single-plate cerametalic clutch fitted by Re:Worx. They now sell and fit these direct. It\'s small amount heavier than the stock clutch, is single-plate and not a bitch to drive. Geff has run this clutch in his 600 bhp drag car, so it\'s tough too. A great compromise.

How much is it??
As I said before.  Im not planning on going over 320-330 bhp like you guys, so I\'d thought that a £500+ clutch is a bit of over kill, no??

Cheers

Smifta

QuoteOriginally posted by J.j.
How much is it??
As I said before.  Im not planning on going over 320-330 bhp like you guys, so I\'d thought that a £500+ clutch is a bit of over kill, no??

Cheers

You\'\'re probably looking at closer to a grand for the clutch I was talking about. That\'s including vat and fitting. Clive\'s option may be worth going for, like he said, somewhere in the middle ground.

I think a stock replacement would be at least 350 +vat, so Clives price looks very attractive.

Alex.
310 atw. Stock twins. Mazdaspeed GT-Concept.

20B_boy

Geff\'s car actually runs Xtreme these days, as does Max\'s...

They start from about 440+vat from recollection and are very easy driving for an uprated clutch. We just fitted a 6 puck Xtreme to Chris\' FC3S and considering its alleged capability is very user friendly...

We have a few clutches on the website: //www.reworx.com

Cheers,
Rich
R.

J.j.

Cheers guys,
Will look into all those options.
BTW, is that paddle clutch on my car worth anything??

clive

QuoteOriginally posted by J.j.
Cheers guys,
Will look into all those options.
BTW, is that paddle clutch on my car worth anything??

If you could put some pics up, that may well help to sell it.
All the best Clive

J4P RX

My clutch has been fine with 320.  I presume its standard.

Mazdarotaryparts

Centerforce Duel Friction Clutch
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

mattmaclennan

I\'ve heard nothing but bad reports about centerforce clutches. Don\'t last very long and don\'t hold much power. Just my 2p.