Intercoolers

[Mr_7]

Any one know of the best aftermarket intercoolers out there?

What is the biggest size (length, width and height) that the FD\'s can handle with chopping them up? Is this affected whether you have single or twin turbos?

What sort of price are they and what sort of pressure are they tested to cheers,  

Mr 7

[John Yorke]

Would imagine the APEXI kit is the top of most peoples list, best price? - ring round the usual supplyers, there seems to be plenty of after market traders these days.
You do have a number of options on IC\'s - uprated SMIC [try rotechnics in Reading or WGT up in Cheshire] FMIC - well there are any number of suppliers as stated before. As to wheather you have twin or single it makes no difference only how deep your pocket is

[bnaellis]

Was out mapping lastnight 1.4 bar of boost for a few hours and  highest intake temp was 22 that was with the trust 3 core intercooler.

rgds

[shaunwil]

OMG, can\'t wait to get my Trust 3 core through the post !

Although the install bit is scaring me quite a bit !

Shaun

[sdminus]

I got my rad and intercooler in. just waiting on the rest of my pipework yay............ Manged to get the rad slanted as well. Gonna take it all apart again and get all the bits painted.
Scott:D

[shaunwil]

Thats fantastic, i see you put your radiator in vertically. any chanch of a photo from the opposite end (windscreen end). How soon before its running again ?

Nice job !

Shaun

[sdminus]

It got a major slant on it mate. This is the closes to stock it will sit with out major operation.

[gavin]

nice job  will you get the battary in or mounting it some where else?
can you tell me where you got the red silicon hoses from and how much they cost (going to be doing the same to mine soon)
does the front bumper have to be removed to get the radiator and a/c out, will be removing my air con too,

[shaunwil]

Looks really cool. Are they the red coolant pipes from carl you where talking about ?? Was it a big job to make the new brackets for the new position for the rad ? I\'ve got quite a bit more to buy before i get mine fitted. I\'m going to relocate my battery as soon as possible. How much is the kit for taking the air pump off the car ?? Is the peice of carbon fibre in the pictures you sent me the cover for it ?

Have you upgraded your injectors yet ?

Cheers

Shaun

[20B_boy]

Originally posted by BNA_ELLIS
highest intake temp was 22

Was pratically snowing here so I\'m not surprised :rollin

Max had sub zero on the way to the ring last time with the GT-spec

[sdminus]

Gavin: The battery is relocated in the boot ( not wired it yet tho ). The silicone hoses came form Clive @ SHY AUTO and i think they were around £70. The nose cone doesnt need to be removed to do the air con. But i had to remove the black platic frame thing from inside of it. It is so much easier once its removed.



Shaunwil: Answered the pipe question above mate. The brackets were easy once i had it all secured in place. The carbon plate is the blank plate used for the air pump blank. Had it made by a friend at a well known local sports car manufacturer. Shame it wont be visable. I gotta now make sence of the rads nest in order to remove the bits for the air pump.:confused:
gonna map it with the stock ones for now and hopefully they should be sufficent untill further development.
Scott

[shaunwil]

Cheers. I\'ll have to try and get some stainless punched out to blank it off. Will i definately have to remove it to fit the fmic or can i leave it till later ? How much of the original y pipe is plastic ? I\'m wondering if i can replace it with a 90 deg silicon bend and then make my hard pipe off it, but the air pump is in the way.

God, loads to think about. Lots to do !!!!!

Shaun

[sdminus]

i dont think you need to remove it at all mate.  I did mine coz i wanted to decat my car and get rid of as much clutter as poss.
I think Trust make a metal piping kit which replaces the stock plastic pipes. If you put a silicone 90 deg bend on the y pipe outlet i dont think it will fit under the strut brace.
Scott

[shaunwil]

Good point on the strut brace ! I\'ll probably have to buy the 90 deg bend anyway for the piping, so may be able to see if it is possible while i have it in bits !

Shaun

[Mr_7]

cheers but does any one have the dimensions of the biggest intercooler that will fit without choppin the front end?