Not impressed !!!

Started by marky, November 30, 2004, 09:42:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

marky

Hi all
Finally got Rex set up last week at WGT thinking that the ride home would be interesting and scare the s**t out of me turns out i\'m not impressed. Doesn\'t seem to have the power and the get up and go i was thinking of.Below is the engine spec what sort of power and boost should i be running? Does anyone have the same kind of spec? I\'m running 0.7 bar boost
Rebuilt 13b on ported housings
3mm Apex seals
GT 35/40 single turbo Ext wastegate
Front mount intercooler
Ally uprated rad
Skyline fuel pump
std primary inj & 1300cc secondaries
Air pump removed
Greddy Profec B2 Boost controller
Apexi power fc and controller
HKS 3" exhaust

Any help would be much appreciated on this it might need more boost but my old Turbo\'d Nova had more pull than this.

Kind regards
Mark:(

Gman

If your Nova had more pull then there is somthing wrong with it.

marky

My thoughts exactly although the nova did pull like a b***h best was a 13.01 1/4 mile. Wasn\'t told anything was wrong. having read a few posts people who have single turbo\'s tend to run around 1 or 1.2 bar, maybe it just needs more boost if the fuel\'s there.
Mark

Gman

When was it rebuilt?  If you want to run more boost make sure it won\'t run lean.  Whack the boost up for one run and see what difference it makes.

13.01 in a nova?? did anything fall off it?  As a mark you would expect at least 12.5 with a single turbo rex.

J4P RX

Yeah on the move a Nova Turbo would do a stock FD, but something with that sort of spec should shift a bit.

Best speaking to Pip I guess.

20B_boy

0.7bar isnt a lot of boost but I\'d still guess you\'d be close to 300 at the wheels if setup right?

The stock twin turbos with the right setup are capable of sub-13s fyi. Most of the GT35/40 setups I know of make 340-360rwhp easy enough at 13psi-ish (granted about 3-4 psi more than u which is not insignificant) and are capable of mid 12s even with Max driving :D
R.

MikeLMR

it won\'t "feel" as fast as a 13 second tin foil hatchback though (no offence intended I own a tin foil hatchback too)

maximtaylor

QuoteOriginally posted by 20B_boy
Most of the GT35/40 setups I know of make 340-360rwhp easy enough at 13psi-ish (granted about 3-4 psi more than u which is not insignificant) and are capable of mid 12s even with Max driving :D

At least I have an FD which moves under it\'s own steam Rich ;)

Max

SCOOMER


gsb876

Depending on which fuel pump you have (skyline one) if you have a power fc you can see just how hard your injectors are working, you should be running 1bar boost to see the results;)  as others have said  .7 bar is not a great deal.

My rx made 342bhp at .6 bar boost :)
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

marky

Cheers for the replies, nice to see other people own or have owned a tin foiled hatch back.
I\'ll give pip a ring and see what he says, the engine has been built 5 months and now covered 2200 miles (slow). It would be nice for it to scare the living s**t out of me.
Kind regards
Mark

rx7veilside

drive it fast in the wet if that dont scare u nothing will..:rollin on a serious note mine is running 0.8 to o.9 but i think 1 or 1.1 bar is when it gets more interesting

BlitzBoy

0.7 BAR is only warming up on that turbo! spoke to Tim at Horsepowerinabox in Oz last year about them. He said the GT35/40 turbo is at its optimum at 18psi with the right fuelling.
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

marky

Sorry for the slow reply folks,just got my computer fixed today. Anyway i\'ve spoke to Pip and he\'s said everything is fine and has been mapped upto 1.2 bar which is good. All i\'ve got to do now is carefully adjust the boost to 1 bar max once i get some parts back as he\'s said to run over this i need to run a higher octane of fuel. Sorry about the delay again and i hope know one is p****d off with me by these posts or by the delay.

Kind Regards
Mark

iaint

One thing I noticed on mine (still twins so not quite the power of a single!) was how smooth it was compared to stock ECU or the Apexi base map.  To some extent this made it feel slower than before even though it\'s a good bit faster.  Could be power delivery is very nice now and a bit deceiving?

Iain

"The way to do is to be." - Lao Tzu