Removing the rear turbo intake

[brundish24]

As title need help on removing the rear air turbo intake pipe from within the car

[Indian]

There are two bolts that hold it on to the inlet of the rear turbo. They are 10mm bolts. You can use a swivel and get them or use a 10mm wrench, preferably on with a ratchet. You will have "wiggle" it out but it can be done.

[philiwily]

Hmm, there was no danger mine was coming out when the engine was in place, I did manage to get it out with the engine tilted forward when taking the engine out.

Phil

[brundish24]

There are two bolts that hold it on to the inlet of the rear turbo. They are 10mm bolts. You can use a swivel and get them or use a 10mm wrench, preferably on with a ratchet. You will have "wiggle" it out but it can be done.

I\'ve tried that but it is in there tight I give it another go but is there any thing I can remove or loosen to make it Easter

[Indian]

as what philiwily stated, you can tilt the engine forward a bit and this might help getting it out, but it can be done without this, and tilting might be more effective if there is no transmission. When I did mine, I remember having to go under the car and using a swivel and extension to reach one of the nuts. Its very tight but can be done

[brundish24]

Ok fellas thanks for the help