FC window stuck

Started by Skifledanabit, February 28, 2011, 01:46:02 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Skifledanabit

Ok, quick answer needed, my window won\'t go up, there\'s power going to the motor as it goes down fine, there\'s just no power to push it up, it doesn\'t even sound like it\'s making a full circuit, I can\'t hear any electrical labouring or anything.

Could it be a faulty/corroded switch? What should I check and how do I rectify it?
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

Prof

Sounds like the window switch if you can\'t hear the motor.
 
Otherwise it\'s mechanical
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


Brett

Is it passenger or drivers side?
Brap Brap Brap Brap

Skifledanabit

i took the switch panel off and took a look, the switches were carbonised, all sorted now! but i have found a couple of fixes to make them work better
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

m1tch

My passenger side can be a bit sluggish, might just need a grease up to make them smooooooth again :)

Skifledanabit

apparently, grease is not the best way to do it, its only a short term fix... read the link, seems to know what they are on about...

http://www.ausrotary.com/viewtopic.php?f=4&t=128329
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]