screws stuck

Started by dr50376272, December 14, 2010, 10:55:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dr50376272

ive got a little screw that has become super rusty and the head of it has been degraded somewhat but it can fit a screwdriver in it but impossible to turn. what do people do to loosen these screws? regards !

david: //www.kagoshimaenglish.com/rx4.htm

jackaleks


trotter

^^this :D

Impact drivers are the way forward (or anti-clockwise if you see what I did there....)
Work hard, play hard house :D

dr50376272

thanks for your help, ill try heating it up, a bang with a hammer, and see how i go !

SiH

No, an impact driver is not a posh worcd for a hammer! It\'s a screwdriver that when smashed witha  hammer, both screws (or unscrews) and applis pressure -a bout 20 quid, and hugely useful :cool:
Until you take all the screws off and replace them with cap head stainless :o

batman

drimmel cut a slot in it then grab  a flat blad screw driver and undo it
REAL MEN PLAY WITH TWINS     :Laugh

Aubec

or drill the fecker out :)
Aubec
 
1995 UK Silver FD
...nearly drivable...Just need MOT...