99 spec brakes question

[CharlieP]

Hi all-
 Now I\'ve been looking up to see if there were differences on the 99spec FD, it seems that the fron disk should be 330mm x32, vented two skin dics.
 
Now mine had standard, single skin disks, could it be these are incorrect!?
 
Or....like the improved turbos, were these only on certain models!?

[CharlieP]

Ok think I\'ve found the answer
 
TYPE R (Hardware is the same as US 93-95 brakes)
Tires: 225/50ZR16 (TYPE RB has 225/50R16 92V and the rest is the same as below)
Wheels: 16 X 8 JJ
Brakes:
Front pistons - Leading and Trailing 36.1 mm
Front disk diameter - 294 mm
Front disk thickness - 22 mm
Rear piston - 34.9 mm
Rear disk diameter - 294 mm
Rear disk thickness - 20 mm

TYPE RS/RZ
Tires: F 235/45ZR17, R 255/40ZR17
Wheels: F 17 X 8, R 17 X 8.5
Brakes:
Front pistons - Leading 33.9 mm, Trailing 38.1 mm
Front disk diameter - 314 mm
Front disk thickness - 32 mm
Rear piston - 34.9 mm
Rear disk diameter - 314 mm
Rear disk thickness - 20 mm

[goldk28611]

Anyone know where i can get replacements of these RS disks or uprated parts in these sizes - having real trouble in replacing my RS 314mm disks.

Any suggestions?

[CharlieP]

Try Balance Motorsport, they do most parts
Also they are next door to Super7Autos (Rotary) so he might be able to help too!

[Speedworks]

Charlie, the twin piece discs are REALLY expensive from Mazda. Even in that range that you ca

[goldk28611]

Try Balance Motorsport, they do most parts
Also they are next door to Super7Autos (Rotary) so he might be able to help too!

Nice one cheers for that.. .I\'ll get Jason to have a word. That would work out perfectly as my car is at his already