K Seal

Started by L18M, February 15, 2009, 03:24:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

HaywardRotary

#15
February 17, 2009, 08:53:31 AM
Don\'t expect instant results with the product,it can and does work even on some pretty bad cases.
You need to run the car for a few day\'s with the K seal in the coolant and keep coolant topped up whilst doing so. After a while it should work.
I used it for 18 months in an FD that had bad problem, and after 18 months pulled the motor even though it was still running fine and it had a cracked plate with a chunk of the metal missing and the inner water seal had popped though.
I am not saying it is the best route as rebuilding is,but if it gives someone time to save for a rebuild then that is where it comes into it\'s own.
Regards
Carl
We warranty our rebuilt engines for Detonation, track day\'s and RWYB and NOW for 30 months which is two and half years or 30,000 miles
We also build all types of race or road engines.
We build race and track cars too.
Any kind of porting undertaken.
Single turbo conversions.
S
Print
Go Up Pages 1 2
User actions