Relocation of the air pump?

Started by m1tch, December 17, 2008, 10:14:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

m1tch

Hey guys, just thought I would ask a question regarding the air pump, with my new turbo, the air pump might (probably will) get in the way of the manifold. My question is regarding the possibility of relocating the air pump further down, but keep it connected with pipes.

The pump could then be run using an electric motor so that the MOT is ok :) I know that you can get an electric smog pump for emissions, what other options regarding emissions?

Brett

You could junk the air pump and run an air bypass into the UIM for MOT\'s.  Failing that, I\'d imagine a properly mapped ECU would get the car through an MOT once your new snail is fitted? :wave
Brap Brap Brap Brap

Prof

Quote from: m1tch;566548Hey guys, just thought I would ask a question regarding the air pump, with my new turbo, the air pump might (probably will) get in the way of the manifold. My question is regarding the possibility of relocating the air pump further down, but keep it connected with pipes.
 
The pump could then be run using an electric motor so that the MOT is ok :) I know that you can get an electric smog pump for emissions, what other options regarding emissions?

If you\'re going to keep \'an\' air pump, why not fit a corvette smog pump - check out the 1300cc.com site - there is a write up on there for how to do it, but to be honest, if you\'re fitting the big turbo you\'ll need a standalone ECU or piggyback to control fuelling etc, so should be able to map the car to pass MOT emissions.  With no cat, the airpump isn\'t doing anything else other than adding weight.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


m1tch

Ok :) I will keep looking around :) im just worried that junking the air pump means that I would have a harder time getting past an MOT

dthebuk

well if your willing to go to reading for an MOT .....


\'91 FC TII - Drifter... Under construction :D
:burnout

L18M

Quote from: m1tch;566567Ok :) I will keep looking around :) im just worried that junking the air pump means that I would have a harder time getting past an MOT

im sure theres other people who will let the emissions slide.. i know a chap in oxford who quite lenient on that.. yet to take my fc for mot but have built gd rapport with him =)
2 doritos on a stick woohoo :rollin

Prof

There are things you can do to help you through emissions :
 
  • Warm up the engine thoroghly before the test
  • Put a new set of spark plugs in the car before the test
  • Do oil change / oil filter change
  • Don\'t put any additives in the tank just before MOT
  • If you can tune your car with piggy back or standalone ECU - get someone who knows that they are doing to cut a little fuel for the idle / fast idle parts of the map
  • Some US guys run their tank nearly dry and then put a litre or two of E85 or Ethanol in - filling the tank straight after the test with petrol.
  • If you\'ve removed the stock air pump, you can fit a corvette smog pump
It\'s a sad fact of life that rotaries run very rich when the start up - you won\'t ever cure that, but when warm there is a bit of fuel that could be cut and still give a stable idle.  It should bring AFR\'s high enough to get through emissions, and provided one of the tests is a pass at idle, they are allowed to rev the car to 2000 to see if the other test will drop in.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex