Which clutch to buy

[XMN]

Hi people,

clutch is starting to slip so I thought I would ask for some advice. I upgrade the HP to 350 so want a clutch that can handle the extra 100 or so horses but still be a nice clutch to use

Any ideas/experiences

Thanks in advance

[Mazdarotaryparts]

Good morning,

We have a very cost effective clutch that we have been selling for the last coulple of years that will suit your application perfectly,

If you would like to follow this link you will find more info

Hope this helps

http://www.mazdarotaryparts.com/bfd-ct002-mrp-developed-exedy-stage-one-clutchb-730-p.asp

[banned advertiser]

We have a range of clutchs to look at
Slightly uprated from stock, good price. Quiet often the ADL clutches are Exedy inside the box.
http://www.rotaryart.uk.com/acatalog/FD_RX7_transmission.html
Cucso here
http://www.rotaryart.uk.com/acatalog/RX7_FD.html
Exedy here
http://www.rotaryart.uk.com/acatalog/Exedy.html
we do get good reports on OS Giken
http://www.rotaryart.uk.com/acatalog/O_S_Giken_Clutch_FD.html

[SiH]

That picture seems to show a paddle?
I\'ve always been lead to beleive that, where possible, don\'t go paddle unless you really need to. My experience has always been that they have a educed lifespan over a similar uprated organic type clutch.

[jm-garage.co.uk]

I would suggest either an OS Giken there are range to choose from OR
 
A single plate Carbonetics. More expensive but fanastic peice of kit. Feel free to email me for more info.
 
Many thanks

[Mazdarotaryparts]

That picture seems to show a paddle?
I\'ve always been lead to beleive that, where possible, don\'t go paddle unless you really need to. My experience has always been that they have a educed lifespan over a similar uprated organic type clutch.

Si

If required we can supply for the same price, the uprated Exedy organic centre plate instead of the ceramic-metallic  centre plate.

Please note that this clutch has an uprated pressure plate and whilst it looks like a standard Exedy pressure plate or ADL pressure plate, this pressure plate has more clamping effort to stop the clutch from slipping despite the increasing power.

Also with either centre plate, the car will drive very close to standard.

Hope this information is of some help.

[Bobbit]

I recently ordered my clutch from these guys: http://www.turboimport.com/catalog/rx7.htm
I ordered the act ZX3-HDMM as it is good up to 402 torques! Postage cost to the Uk was $115.95 so in total it was $600.95 or in real money about £300 and it includes the release bearing, allignment tool (which i\'ve been told you dont need anyway,) and the pilot bearing.