Tyre pressures for track

[FlappyCat]

Hi All

Back on the road after some overboosting & MOT hassles. Decided to treat my TII to a track day.

What are the recommended tyre pressures for the standard rubber for track use?

Thnx:
3gears-rh

[JohnnyP]

Depends on conditions but in the dry I normally go 36psi front and 35psi rear.

Once you get some heat in the tyres the pressure will go up a bit more.

[FlappyCat]

Thanks JohnnyP

[andysmee]

I usually go for +4 psi over road pressure (last time I started at 32f 34r on my FD), and then if I have no grip I drop it down a bit. Better to start the day with too much pressure and no grip while you\'re learning the track than to run through your tyres later on

[FlappyCat]

Thanks for input - tyres performed well at 35psi ... but a small incident will a tyre wall means I am looking for an offside front wing!

Anyone got one?

Preferably white with Turbo II stickers but I may be aiming high!

Thnx

Ian

[gillard28]

you should tune your tire pressures at the track. My advice is to go out and do 10 or so laps. come in check the temps and pressures and adjust.