Getting a new steering wheel?

Started by jsrx7, July 17, 2007, 07:31:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

jsrx7

July 17, 2007, 07:31:35 PM
Hi

Has anyone got any advice on buying and fitting a new steering wheel for my FD? whats involved?

At the moment the car has an aftermarket momo steering wheel on, but its looking a bit warn so I was thinking about getting a new one. If I already have this momo boss on, does it mean I can easily attach another aftermarket wheel? Or will I only be able to attach another momo wheel to this boss?

thanks for any help.

pete sparrow

#1
July 17, 2007, 09:27:31 PM
I bought a new Momo and fitted it to the old Momo boss that was already in the car. Best to take your car to Halfrauds or performance car parts specialist and do some test fitting mate.Only way to be sure.:)

leeincivic

#2
July 17, 2007, 10:35:48 PM
i fitted a momo boss and an omp wheel fitted straight on so maybe they are all universal???
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Jimjitsu

#3
July 17, 2007, 10:56:32 PM
you sure its aftermarket mine has a momo and it looks like standard equipment to me

peterwolds

#4
July 18, 2007, 06:43:38 AM
when i got my car had the momo D shaped wheel - hated it plus always squeaked changed for a sparco wheel plus boss.bugger to get dead centre the steering wheel with tyres straight,umpteen goes that i thought were right only to go for a run to find steering wheel out of line slightly when tyres straight.eventualy got garage to do it then found they missed the plasic bit that cancels indicators when fitting the damn thing plus this boss hasnt got the tapered open bit to allow horn wires through so no horn (never use horn) but is mot time this month so needs sorting.should be an easy job !!!!!!!!!
:Typing Pete

jsrx7

#5
July 18, 2007, 09:01:12 AM
QuoteBest to take your car to Halfrauds or performance car parts specialist and do some test fitting mate.Only way to be sure.

Just had a quick look at halfords and the only one they have is a mountney one for £50. Actually looks ok in the picture but at that im guessing its probly not as good quality as say a momo? Has anyone had one of these steering wheels. Does anyone know if they have more choice in store?

Quoteyou sure its aftermarket mine has a momo and it looks like standard equipment to me

I thought it would have to be aftermarket if it had a momo steering wheel? The way its attached with the boss doesnt look standard though. Isnt actually on straight either.

Can anyone reccomend any good looking wheels? Have seen a lot of ugly over the top ones around!

Jimjitsu

#6
July 18, 2007, 10:00:36 AM
Quote from: jsrx7I thought it would have to be aftermarket if it had a momo steering wheel?
Quotei think some did come with a momo as standard im sure someone with better knowledge will jump on here and correct me :o

pete sparrow

#7
July 18, 2007, 06:29:04 PM
Check out.http://www.ripspeed.com/ or //www.demon-tweeks.co.uk
Loads of wheels in these sites

dazsir

#8
July 18, 2007, 07:53:10 PM
I have a near perfect momo "race" for sale for £70 delivered.

email, daz_p7@msn.com

for more details

brooksie

#9
July 18, 2007, 07:53:55 PM
Key!s steering wheels are just about the coolest thing on the planet.

chrno

#10
July 19, 2007, 08:42:30 AM
I have just one thing to say, KEY!S

Since I recieved mine here in Japan, I have been driving it in thin air cause I can\'t wait to get back to Sweden to fit it. :P  THEY ARE SOOO NICE!

Will post up some pictures later today.
Print
Go Up Pages1
User actions