Is some shaft play on stock twins normal?

Started by RobbieRX-7, May 06, 2007, 11:33:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RobbieRX-7

just been taking a look at my turbo\'s whilst the engine is out and i\'ve just noticed that i have shaft play on both turbo\'s. There is no play when you push or pull the wheels, but there is play when you wiggle the wheel side to side(about 1-2mm). Is this normal? Is it time i went single turbo or can these be rebuilt?

elford_tim

I wouldn\'t think that any play would do them much good.
1989 Turbo II convertible in Essex Stilletto white

Jono FD3

As long as the veins dont touch the turbo housing & there is no play in the direction the shaft runs then things should be OK..... when the engine is running oil pressur in the turbo removes 90% of the play, but obviously the less play the better!!

Jono