tein suspension

[tom]

when i got my rex it all ready had after market tein suspension (type HA ,hight adjustable) jobby\'s! and whilst havin my front bumper repainted today i thought i\'d try th drop the front a tad!the adjuster nut was about half way up the thread and i just wondered if anyone new if i should screw the adjuster up or down in order to lower it!
thanks!
thought i\'d attach a picture too, its not this high at the front by the way, its jacked up!!

[Gman]

Not too much of a tad i hope? or you will be joining my RX7\'s against speed bumps club:D

[Martiny]

I have the same suspension, and I have adjusted the damping, but not the ride height.

Please be aware that if you adjust the ride height, you will be changing other settings, such as Camber and Toe-in. Therefore, you will need an alignment shop to do the alignment again.

Also, is the front riding higher than the rear? I would not recommend dropping the front only.

[tom]

yeah i thought about the wheel alignment but i\'ve got elite just up the road and they do all the lazer alignment! my cars running 18\'s, and the rear just sits under the arch but theres a 10-20mm gap on the front and just eats at me, i\'m not bothered about loosing the gap just redusing it abit to take the eye off it!
thanks!

[Martiny]

Ok, sounds good. Have you got tthe tool to adjust it?  Its a C shape, and I could not find out which size I need, so please post when you know what size we need, eh?

[<Daneh>]

i know i\'ve Got "Tein Gas Adjustable Suspension" but i\'ve not touched it since i bought it.

Im soon to put 18\'s on and hope it\'ll be okay as it\'s scraping on speedbumps as it is. Parked mine next to a standard one when at rotechnics and mine was so much lower it was silly, mines also missing the front splitter.....probably just aswell....pics in my sig.