fuel pump & filter for swirlpot

[GeenIdee]

Hey guys,
 
I am prepairing the fuel system in my car in such way i can easily put a swirl pot in it later on.
 
 
I was wondering, for the guys who did this before, what kind for filters they used (before main pump and after main pump), and also what kind of fuel pump is used?
 
 
I was looking at aeromotive but i am getting very confused with the fuel filters as i am using AN-06 hose from earl\'s.
 
For now it is important that i have a fuel filter to replace the stock filter, and later on a fuel pump and filter for that pump.
 
So, this is what i have in mind for now:
 
-aeromotive A750 Fuel Pump, AN-08 inlet, AN-06 outlet.
-part no 12324, 100 Micron, ORB-10 as a pre-filter with AN-08 adapters
 
I think that part isn\'t much of an issue, i think that will work. But as a filter before engine i thought about: part no 12321, 10 Micron, ORB-10 with AN-06 adapters.
 
Only thing is, when reading the tech bulletins on their site they recommend to use AN-10 but the pump already has an output for AN-06.
 
 
So i would like to ask some opinions about what to do.
 
-kevin