Blata B1 mini bike

Started by m1tch, February 24, 2012, 05:40:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

m1tch

Hi all

I am going to sell one of my mini bikes, the bike in question has just had a full top end rebuild done on it and annoying has more compression than my modded mini bike I also have! I just need to sort out the idle screw on the carb as I have just cleaned out the OEM carb and need to just set it.

Please note that this is a Blata B1 rep - its a 37cc watercooled 2 stroke @ around 8bhp, it is NOT cheap 49cc air cooled bikes produce around 2.5bhp.

Parts for this bike are very easy to come by (a piston, ring, pin and bearing is £11). There is also a \'big bore\' kit available to bring it up to 49cc increasing the power to around 11bhp - crazy power for such a small bike!

Parts can be found here:

http://www.petrolscooter.co.uk/spare-parts/mini-moto-parts/mini-moto-racing-bike-b1-replica-liquid-cooled-parts.html

and

http://www.funbikes.co.uk/sc-Origami_B1_Spares-13-0.aspx

I am looking for £150 collected, the bike itself is basically standard, I have done gasket matching, the head has been modded to have slightly larger waterways (good for cooling!), I have also chamfered the edge of the ports to reduce ring wear and polished the exhaust runner. I also believe it is fitted with heavier springs so it engages later in the RPM band giving better acceleration.

THIS IS AN OFF ROAD ONLY BIKE




m1tch


kiwimazda

I am not surprised at that price. I would love to strap my kids to it and let the little evil kinevils loose in the back garden

m1tch

Quote from: kiwimazda;815235I am not surprised at that price. I would love to strap my kids to it and let the little evil kinevils loose in the back garden

Ive still got a fully upgraded bike in the garage with CF reeds etc, might fit a big bore kit to increase the power :rolleyes: