anti freeze.... anything in it that would afect metalwork?

Started by Jono FD3, December 26, 2010, 12:02:17 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Jono FD3

Like the title says guys, is there anything in anti freeze that will afect the paint or metal work on a car body?
reason I ask is I\'m getting a little peed off buying de icer as it only lasts a few days and you don\'t get much out of a can...... so what I was thinking is, if anti freeze doesn\'t afect the paint I was going to put some in a little squirty bottle & use than instead.... would need less of it and it also works out alot cheeper too!!

Jono

clive

As far as I can remember Anti Freeze will potentially harm paint work if left undiluted also I think you will find that engine anti freeze wont shift ice like deicer any way as they are completely different chemicals,

News paper on the screen instead ???

Hope this helps and Happy Christmas :Santa:Santa
All the best Clive

batman

heres a tip all de icers and such have chemicals in that rott rubber so even if your paint work stays ok the wind screen seals and wipers suffer.
no need for de icer just simply luke warm water yes luke not hot or close to hot as the glass will shatter little jug full of luke warm water over the window quick wipe of the wipers clear window . saves money no fuss
you can experiment with the tempurature but do not ! use hot
REAL MEN PLAY WITH TWINS     :Laugh

rx-dave

Get antifreeze on your glass and you won\'t be going anywhere fast as it\'s as greasy as hell!!  You\'ll then need to wash your glass and then you\'re back to where you started with frozen glass :Hammer

skybusr34

Quote from: batman;733994heres a tip all de icers and such have chemicals in that rott rubber so even if your paint work stays ok the wind screen seals and wipers suffer.
no need for de icer just simply luke warm water yes luke not hot or close to hot as the glass will shatter little jug full of luke warm water over the window quick wipe of the wipers clear window . saves money no fuss
you can experiment with the tempurature but do not ! use hot



agree with you here except. i use jug of cold water first. cold water is about 8>9 degrees which is still warm enough to heat up the screen from minus whatever temp . then when you pour mildly warm water over the screen doesnt have shock.

reason i do this is luke warm water is still 30 to 40ish degree ( if it feels warm to your hand its over 37 degree) and if its minus 10 outside thats a shock increase of upto 50 degrees. still potential smash..

so do cold water first dude:chat
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

David Nock (RIP)

Quote from: Jono FD3;733985Like the title says guys, is there anything in anti freeze that will afect the paint or metal work on a car body?
reason I ask is I\'m getting a little peed off buying de icer as it only lasts a few days and you don\'t get much out of a can...... so what I was thinking is, if anti freeze doesn\'t afect the paint I was going to put some in a little squirty bottle & use than instead.... would need less of it and it also works out alot cheeper too!!

Jono

Yes, it will lift the paint. I think there\'s warnings on most bottles of antifreeze not to get it anywhere on the bodywork.
1985 1st Generation FB-Silver. UK Car-K Reg.
Departed this world on June 23rd 2019
http://mazdarotaryclub.com/forum/index.php?topic=84914.msg910901#msg910901
Sadly Missed

Mir

I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

batman

Quote from: skybusr34;733997agree with you here except. i use jug of cold water first. cold water is about 8>9 degrees which is still warm enough to heat up the screen from minus whatever temp . then when you pour mildly warm water over the screen doesnt have shock.
 
reason i do this is luke warm water is still 30 to 40ish degree ( if it feels warm to your hand its over 37 degree) and if its minus 10 outside thats a shock increase of upto 50 degrees. still potential smash..
 
so do cold water first dude:chat

 
ok depends on what you\'d call luke warm and cold i wasnt going to start getting anal and quoting temperatures but !
i have used warm water and never had a problem but i dont want to be the one responsable for somebody doing it with warm and then having a wet dash board:evillaugh
REAL MEN PLAY WITH TWINS     :Laugh

skybusr34

Quote from: batman;734040ok depends on what you\'d call luke warm and cold i wasnt going to start getting anal and quoting temperatures but !
i have used warm water and never had a problem but i dont want to be the one responsable for somebody doing it with warm and then having a wet dash board:evillaugh


screw you then.:Grrr only adding to to good advise you had given:Hammer
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Jono FD3


skybusr34

anti freeze effects paint metals and rubber. use as little as possible dude.
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

batman

Quote from: skybusr34;734048screw you then.:Grrr only adding to to good advise you had given:Hammer

 
love you lol :InLove
REAL MEN PLAY WITH TWINS     :Laugh