Clutch

Started by davyv, February 17, 2009, 08:42:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

davyv

Hi all. I am after an uprated clutch for about 400atw. I really want one like the stock clutch nice and light as the cars only for weekend driving and no track ect. Where from and how much, thanks.

Mazdarotaryparts

If you would like to follow the link below this should be by far your cheapest option for buying a prooven good quality clutch.
 
If you were track daying/ Racing or Drag racing we would recommend a different clutch but with many road FD\'s out there with this clutch fitted this should be  that fits exactly what your looking for,


http://www.mazdarotaryparts.com/bfd-ct002-mrp-developed-exedy-stage-two-clutchb-730-p.asp

Hope this helps
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

davyv

What about the FD-CT006 CENTRE FORCE DUEL FRICTION CLUTCH on your site Clive. What power is that good for.

Mazdarotaryparts

We have sold a few of these over the years with no complaints and know of a 600 bhp that ran one of these but the car was never dragged or tracked and driven gently!

If your really interested we would have to re-check the price of this item as it\'s American and as you will see on out site, we can\'t guarantee prices at the moment.

But even without any price increase it would be £173 more than the clutch we suggested which will be fine providing you are going to drive the car only on the road,

If you want real belt and braces I would suggest you look at the Hyper Single on this link,

http://www.mazdarotaryparts.com/b-fd-ct003-exedy-hyper-single-clutch---complete-kitb-1295-p.asp


Hope this helps,
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

shaunwil

I\'m running with a hyper single and I\'m not really a fan of it. Been wondering what you would recommend for up to 450atw with as close as stock feel as possible ?

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Mazdarotaryparts

Quote from: shaunwil;586463I\'m running with a hyper single and I\'m not really a fan of it. Been wondering what you would recommend for up to 450atw with as close as stock feel as possible ?

Shaun

The Centreforce will cope with this power and give you a stock type pull away unlike a paddle clutch, plus you can use the stock flywheel that gives you the extra inertia to pull away nicely and not like an F1 car leaving the pits,


More details can be found on this link  below,

http://www.mazdarotaryparts.com/bfd-ct006-centre-force-duel-friction-clutchb-733-p.asp


Please allow around 2 weeks for delivery as we would have to get this in from America,

Hope this helps
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800