KGParts.com

[aeseaton]

Hi mate.

Just to confirm you\'ve got Kit B? As this kit should come with all the fittings and hose you need.

Im running twins still and have located my fpr on the passenger side front suspension cover. (the bit that goes rnd the suspension, not sure what its called!) I fitted one house from the fuel rail to the fpr into the side hole and the bottom hole goes down and loops back up to connect to the rear fuel return line.

Injectors should come with there own connectors as the standard plugs dont fit the new 1600cc injectors. Fuel rail should fit in nicely, bit of a squeeze to get the fuel rail attached to the delivery pipe but does go on.

Vacuum line has been taken off under the UIM, same place the stock one comes off. I can try and get some pics up but not till the weekend. Any probs give me a pm and ill try n help.

Andy

[JBerg]

everything in kit b was included and you will need nothing else to install the kit.
 
The kit contains the braided fuel lines and all the fittings you need ...just follow aeseaton\'s advice and it will be fine. :Thumbsup!

[DR SCHNITZEL]

it went ok apart from i needed an extra fuel connector and a m of hose. can you show me where the new wires fit?

do i snip the ends and crimp these white ones on? photos would be good cheers

[DR SCHNITZEL]

Just to explain the fuel hose needs to convert to kg part at the intake and has to go back to the tank via another connector, 6-an the kit only had 1 not 2, and to run in parrallel you need 3 of them plus a t piece.  i have all the bits now only came to an extra 30 quid.

anyone got a air temp sensor? its all i need pretty plz

[Shiuko]

http://www.onlineautomotive.co.uk/product_details.php?part_id=20868&type=part&table=6&product_ref=&manufacturer=30&model=1741&engine=17&model_type=81142&product_cat=6&product_type=35&keywords=

You could get one there  quite cheaply.

[DR SCHNITZEL]

hi shiuko, got one of them but i need the uim one mate. making the system parralell on friday

[DR SCHNITZEL]

just need to know what to attach these 1600 injector wires to?
anyone show me