91 FC...precat?

Started by m1tch, March 31, 2008, 05:07:14 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

grinder

a FCD - should be no more than about £30 really

have a look on ebay.com - thats the cheapest place usually ( or ausrotary )


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

m1tch


Prof

Most chipped ECU\'s don\'t require the FCD, which effectively just lies about the boost pressure to the stock ECU. The chipped ECU\'s don\'t cut fuel to the rear rotor, and in fact are likely to have corrected maps for higher boost values.
 
The danger of the FCD is that it tells the ECU that boost is 8psi when it could be much higher, so the appropriate amount of fuel is not being delivered by the injectors (FC\'s tend to run very rich anyway, so there is some headroom).
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex