Clutch prob [I think]

Started by johnf, December 27, 2004, 10:36:04 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

johnf

I think I have a developing fault, clutch related.

When the car is cold I have no problem with gear selection or the \'bite\' point of the clutch.

However as it gets warm the gear selection becomes knotchy and it also starts to creep forward when stationary even with the pedal fully depressed. not an even edge forward but in pulses.

My main concern is that something may be coming loose and may cause a major problem if I don\'t sort it out soon rather than waiting for a bigger problem later on.

A new cluch was fitted about six months [5k] ago so that should be OK.

So what can change as it gets warm?

John
I started with nothing and I have most of it left

t2rew

the clutch fluid flexy hose could be expanding and therefor takeing away the pressure needed to move the clutch. or it could and more than likely is the clutch master or slave cylinder. look for wet patches around both of these. the wet one is the leeky one.

Red and Single

Holy thread reassurection !!

I have exactly this problem, the bite point starts off at midpedal where I set it, but it gradually moves closer to the floor as the car warms up.

Neither cylinders have any leaks that I can see (I\'ve had a good look)

Can it be air in the system ??

Any other ideas ??

I\'m running OS Giken Twin Plate with push - pull conversion.
Dave Hughes
13.352 @ 109.03mph (running 0.75 bar  :rollin )
Red \'95 Type R T04S & Bare Arsed  :chat

Mazdarotaryparts

Hi Dave,

If you have no leaks and the car is "walking off" then it\'s yer master cylinder sir.
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

Red and Single

Oh, dont say that !!

I imagine thats a bloody pig to change :(
Dave Hughes
13.352 @ 109.03mph (running 0.75 bar  :rollin )
Red \'95 Type R T04S & Bare Arsed  :chat

Mazdarotaryparts

Quote from: Red and SingleOh, dont say that !!

I imagine thats a bloody pig to change :(


Piece of cake to change :3gears-lh
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

Red and Single

How much for a spanker then Clive ??

And how much for the instructions on how to fit ??
Dave Hughes
13.352 @ 109.03mph (running 0.75 bar  :rollin )
Red \'95 Type R T04S & Bare Arsed  :chat