Please Help Me

[EDZAIRX7]

Thank You Very Much For All Of You Helped Me Out
 
Yesterday , I Take Off All The Sparkplags Cleaned, And I Take Egi Main Fuse Then Crank The Engine 3 Times.
 
After I Put Everythink Back On
 
First Turn Car Started Perfectly And There Is No Smoke But I Didnt Let The Engine Get Hot Because We Had To Close Garage
 
Today I Am Goin To Start The Car And Test Everythin


1- Get The Engine Hot , See If Smoke Comes Out Again
 
2- Check Fault Code If There Is Any
 
I Think What Make My Car Work Perfect Is The Small Sensor As Grizzly Descriped - I Took The Pipe , Checkted Replugded And Plugded The Electric Aswell And Replugded... Car Seems Working Fine Now..
 
 
Anyway Sorry About My Poor Language And Thanks Again For All Of You

[EDZAIRX7]

When I Disconnect The Airpump Pipe It Stop Smoking - When Pipes On It Smokes
 
The Air Pumb Has Been Chance - Could It Be Posible From The Catalic Converter .. The Straight Pipe Where Main Cat Was
 
 
Any Helpplease

[Grizzly]

Do you mean when you just pull the Pipes off the air pump it stops smoking? Is that with them blocked off?

If not it could be you are creating an Air leak which is Weakening the Mixture??

Check the ECU\'s fault codes and see what it says, its more likely to be something like a water / Air / Lamda temp sensor than the air pump its self.

[Grizzly]

BTW if you don\'t have a Cat on you can remove the air pump and block off the Pipes.

[EDZAIRX7]

BTW if you don\'t have a Cat on you can remove the air pump and block off the Pipes.

WOULD THAT BLOW OF THE ENGINE, I THINK BEST IDEA IS TO WAIT KERIM POWERGAINS TO COME BACK FROM HOLIDAY .. HE WILL SOLTED OUT ...

THANKS M8