Hehehehehehehehe

Started by evo_ray, June 12, 2007, 04:10:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

evo_ray

:wiggle:wiggle:wiggle:rollin:rollin:Giggle:Giggle

Laeeq

Laeeq

m4drx

fduk.

evo_ray

I have Booooooooooooooost!!!!:3gears-rh

m4drx

i found a check valve that stopped pressurisation etc of perssure chamber.

checked other bits then noticed the damn boost controller was connected to feck all!

he got some hosing and whalla
fduk.

evo_ray

Quote from: m4drxfixed his car
You\'re supposed to be at work! It\'s amazing how much pleasure half a metre of silicone pipe can bring you (no funny ideas boys!). Plugged in the Boost controller and off she goes! And boy does she go!!

Need to set it up properly though. Hit 1.14Bar boost:eek: and the boost gauge keeps beeping at me :Giggle.

evo_ray

Quote from: m4drxchecked other bits then noticed the damn boost controller was connected to feck all!

he got some hosing and whalla
not whalla...........WHHHHHAAAAAALLLLLLLLLLA!  Sorry, can\'t get the grin off me face :Laugh. Thanks for the diagnosis

Big thanks to Kash for posting that Blitz DSBC manual also. It came in extremely handy!

Kash_

QuoteBig thanks to Kash for posting that Blitz DSBC manual also. It came in extremely handy!

no worries dude, I knew it would come in handy :wiggle


QuoteNeed to set it up properly though. Hit 1.14Bar boost and the boost gauge keeps beeping at me

That\'s very high boost :eek make sure you get it setup properly otherwise that\'s just asking for trouble. Maybe turn the gain\'s down a bit on the controller to stop it boosting so high?

evo_ray

Quote from: Kash_no worries dude, I knew it would come in handy :wiggle




That\'s very high boost :eek make sure you get it setup properly otherwise that\'s just asking for trouble. Maybe turn the gain\'s down a bit on the controller to stop it boosting so high?

I set the gain at 5. That seems to be the recommended setting for FD\'s. I\'m just reading through that manual and another that I have to see where i went wrong in the settings.

If anyone has a Blitz Dual SBC fitted, It would be nice to know what settings they have on theirs.

m4drx

im off sick :evillaugh

set the controller properly as your fuelling wont support that boost.
fduk.

evo_ray

Quote from: m4drxim off sick :evillaugh

set the controller properly as your fuelling wont support that boost.
I kinda already experienced that!:eek Took it out for a quick run and at one time the fuel could\'t keep up!

m4drx

you are on apexi too so the parameters are different and fuel cut is also. you\'re treading dangerously until its set.

my one was the same as its decatted also so i had a hard job setting the greddy to control the boost and it kep overshooting.

let me know if you need any help.
fduk.

evo_ray

Quote from: m4drxlet me know if you need any help.

I\'m sure we can cure your sickness! JUst put you infront of a 7 and hey presto, feeling much better again!

m4drx

Quote from: evo_rayI\'m sure we can cure your sickness! JUst put you infront of a 7 and hey presto, feeling much better again!

true but i spent 12 hours in it on the tunnel run on saturday didnt get back till 5ish! :2eek

just want to drive it more and more though but a few more jobs to do want the clutch just right then ill be happy.

but soon i will start my drift project... but thats a whole other story.

anyway anytime you want to feel some g force im not far, :3gears-lh :evillaugh :rollin
fduk.