Cracked heat sheild

Started by RedRummy, April 07, 2007, 08:48:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RedRummy

Hi,

The heat sheild above the exhaust back box has cracked (suspect its just a heat fracture)...  It moves and the crack is getting worse as I drive, and I can hear it rub when I go over bumps...

Can I get it welded, or should I just get a new one...

How much would these things cost?

Here is a piccy...  its a bit crap, but you can see the crack
"Life moves pretty fast....
If you don\'t stop and look around once in a while, you could miss it..."
Ferris Beuller, 1986.

David Nock (RIP)

I\'d look at riviting a strengthening plate in, but I\'m not great at bodywork, just an engineer.
1985 1st Generation FB-Silver. UK Car-K Reg.
Departed this world on June 23rd 2019
http://mazdarotaryclub.com/forum/index.php?topic=84914.msg910901#msg910901
Sadly Missed

allstaruk

Riviting a plate in will do it or just get another bit of metal and bend it rounds and attach it.

Fish

Had the rear wheel off the other day to replace the rear pads and noticed the same thing.

Fish

RedRummy

OK, cheers guys... will try and fix it...

Mine must\'ve been like that for ages too, but its only recently \'torn\' enough to start squeaking as it rubs together.

The crack is prolly about 30-40cms long..
"Life moves pretty fast....
If you don\'t stop and look around once in a while, you could miss it..."
Ferris Beuller, 1986.