engine cuts out at high boost/revs

[mattsavage]

What would happen if I simply took the pipe of the pressure sensor and blocked it up?

[grinder]

errrrrr no idea to be honest - you might get NO boost at all ??

http://www.rx7club.com/showthread.php?t=608882&highlight=fcd

http://www.rx7club.com/showthread.php?t=621908&highlight=fcd

[mattsavage]

Ah-ha! I\'ve just taken the pipe off, then pushed a small bolt in the end of the pipe. Been for a quick burn up the road and it seems fine!
But I can now notice a very (very) slight hesitation at 3800 rmp, is this something to do with the second injectors?
Cheers,
Matt
 
PS, if anyone thinks I should not have the pressure sensor pipe blocked up and not connected PLEASE let me know, I don\'t want to damage anything!

[grinder]

speak to a tuner and see what they are selling them for - then work out if the yank ones are cheap

no idea about your little mod - you could be running with no boost protection at the mo ??

Stu

[Brett]

If you take that pipe off you will ALWAYS run lean, leave it alone!

How many miles has the car done total?  (Give us the full spec, colour etc we like to know who has what! )

Look for a knightsports \'FBCD\' Fuel cut defencer, they go pretty cheaply on worldwide ebay. (Do a search for FC3S on ebay)

:wave

[mattsavage]

Hi. ahhh, running lean. OK, I\'ll put it back on.

[grinder]

best idea to be honest