turbo translation

[Mr_7]

Decided to go single after reading many threads i want a T04 size turbo which keeps drivabilty, with low spool but enough effeciecntcy to get big power eg 350- 380rwhp at the upper rev range, what can i expect from this following turbo on an apexi, decat, mild street port any help thanx

- GT45 T4
- Inlet (Exducer/Hot Side) T-4 Flange 70.1mm x 82.55mm (2.76" x3.25").
- A/R 1.05 Exducer
- A/R 0.66 Compressor
- Cooling/Lubrication Oil
- Outlet (exducer/hot side) 4.25" V-Band
- Inlet (compressor/cold side) Ø 109mm (4.25")
- Outlet (compressor/cold side) Ø 86mm (3.38")
- Compressor major diameter Ø 98 mm

[Mr_7]

bumpty bump

[Shyne]

BIG SNAIL!!!!!! have you spec\'d any of the supporting mods? Fuel, I/C, MAP sensor etc

The 45 is more than capable of supplying boost, its all about tuning for real power figures fella.

Best of luck though, I like the idea of a 45 on an FD!!! Yum Yum

[sadgoth]

You might find it somewhat laggy if you have a mild streetport though. The big Garrett turbos (most of which are really truck turbos) need a lot of flow to spool up, big ports will happily run big tubbys

[Shyne]

That said, the GT\'s do have the slight benefit of ball Bearings so BAT is going to be lower than the equivalent bushing turbo.

[antnicuk]

i think that would be quite laggy as mentioned

i have a gt35/40 which creates 380 rwhp on a Turbo II engine so would give more on an FD. I get full boost at about 3600 ish rpm.

[Mr_7]

cheers guys il look around and have to deciede soon as a single is screaming out to me lol

[Mr_7]

im probably going to spec it as the follows:

GT 45 turbo
600*250*65 FMIC
044 fuel pump
Injectors (not sure need help on selecting)
Apexi Comander
3 bar map sensor

Not sure of other parts as il check as i go along last car i done was my 3DR RS500 it made 380rwhp so need MORE

[imebgo]

I think I have found this turbo on ebay,

Is that what your going for still?  How are you going about sourcing the rest of the stuff? manifolds etc..?

I was looking at a complete kit but im edging towards seperates from ebay and various sources.

J

[Ed_RX7]

looks like a chinese piece of (xs power) crap if you ask me.......but if thats what you want then go for it.........(seems far too cheap)...you do get what you pay for!!!!!
 
http://cgi.ebay.co.uk/SKYLINE-RB26-GT45-Turbo-Manifold-and-50mm-WG-KIT_W0QQitemZ250071146558QQihZ015QQcategoryZ38786QQssPageNameZWDVWQQrdZ1QQcmdZViewItem